AT&T 1030, 3070 TOUCH-TONE Enable, Only for systems with rotary lines, Touch Touch-Tone Enable

The feature remains active until you:

●Touch Privacy again.

The green light next to the button goes off.

TOUCH-TONE ENABLE

(Only for systems with rotary lines)

If you have telephone lines that carry rotary signals, you can use the Touch-Tone Enable feature to switch to Touch-Tone signals midway through a dialing sequence. This lets you take advan- tage of bank-by-phone, credit card authorization, and alternate long distance services.

To program: ● T/P to P ● Touch the button ● Dial *76

●T/P to center

To switch from rotary pulse to Touch-Tone signals as you dial a number:

●Lift your handset.

●Dial the first part of the number.

●Touch Touch-Tone Enable.

●Dial the remaining numbers.

The Touch-Tone Enable feature turns off when you hang up your handset or touch Recall.

Privacy

+
	+	Touch-Tone	+
		Enable

38