To signal a coworker: |
|
|
|
|
|
| |
● Without lifting your handset, touch a Manual Signaling | + |
| Signal Mary |
button. |
|
|
|
|
|
|
|
You can also touch a Manual Signaling button to signal some- one while you have an outside call in progress. If you program this feature on a button with lights, the green light next to the button goes on when your coworker uses his or her voice ter- minal or uses the Do Not Disturb feature.
LOUDSPEAKER PAGE
If you have a loudspeaker paging system, you can make an- nouncements using your voice terminal. Your system may have as many as three paging zones; you can choose to make an an- nouncement to one or all of the zones.
If you have available feature buttons, you can use the instruc- tions below to program a button for each loudspeaker paging zone. However, it isn’t necessary to program a button for loudspeaker paging. You may dial a code instead.
To program: ● T/P to P ● Touch the button ● Dial *91
+a paging zone code (80=all zones, 81=zone 1, 82=zone 2, 83=zone 3) ● T/P to center
26