ACCOUNT NUMBER ENTRY
(For use only with the SMDR feature)
With an Account Number button, you can enter an account number that identifies who should be billed for the call. Program this feature on a button with lights.
To program: ● T/P to P ● Touch a button ● Dial *82
●T/P to center
To enter an account code:
●Touch Account Number while you have a call in progress.
The green light next to the button flashes.
●Dial the account code.
●Touch Account Number again.
If the account code is entered properly, the green light next to the button stops flashing and stays on.
If you enter the account code incorrectly, keep the call in pro- gress and simply repeat the above procedure.
CALL PARK
Use the Call Park feature to put a call on hold for someone to pick up from any voice terminal in your MERLIN system. You can use the instructions below to program a Call Park button on your voice terminal. Or, you can save a feature button for another use, and dial a code to park a call.
If you have a loudspeaker paging system, you can use it to an- nounce the call.
Account Number + | + | Account Number |
account code
39