Nortel Networks i2022 Series manual Setup, Directory Changes

Page 40

i2022 ISDN Teleset

Directory Changes

When Directory (DIR) is pressed, the following is displayed.

Setup

NOTE: To transfer a name/telephone number from the Call Log to the Directory, see page 44.

NOTE: The Setup key is used to set Dialing Options. It is not used to setup the directory. Dialing Options are discussed later in the chapter.

If adding an entry, enter the name, press the same keys that are used to dial numbers on the touchtone pad.

For example: the name ED is entered by pressing the letters E and D which are found, along with F, on the numeric key (3)on the keypad. Press the key once and D is entered. Press it twice for E, three times for F and a fourth time for the number 3 . After entering E, press the softkey under the right hand arrow. This indexes the cursor one space to the right of E to accept the next digit; in this case D. Use the same method to enter subsequent letters.

To return to the previous screen where Directory was chosen, press the MORE key.

The Del softkey deletes the character over the cursor.

To delete an entry from the Directory press DIR, Del. The entries will be displayed in alphabetical order. Press the Next, key to located the entry to be deleted. When the entry to be deleted is displayed, press Clear.

NOTE: When deleting Directory entries, the ClrAll key will clear all of the entries in the Directory.

38

Image 40

Contents I2022 Series Isdn Teleset User’s Guide Federal Communications Commission FCC Requirements, Part Mandatory Customer InformationTrademark Acknowledgment Introduction About this Manual IntroductionI2022 Teleset Features Voice Operation FeaturesAccessories InstallationParts List Switch Settings Power Switch TR SwitchIsdn Interfaces I2022 Equipped with an S Interface ModulePS1/PS2 Switch Settings Powering the i2022 LocallyUsing Lucent 1215B Power Supply POINT-TO-POINT Circuits Terminating ResistorsPASSIVE-BUS or Multipoint I2022 Equipped with a U Interface Module Line Configuration Installing the Logo Plate Inserting and removing the modulesSoftkeys AUTO-Install ExampleAUTO-Switch Auto-SPID ProceduresNext Prev Select Prompt Auto-DownloadManually Choose the Switch Type Manually Entering the Spid Press MENU, MORE, MORE, Config, MORE, MORE, SpidApplication SpidManual Switch Downloading Pots P+D DataManually Programming Call Appearances Page Manually Programming Feature Keys Adjusting the Display Viewing Angle Setting UP the TelesetSetting the Contrast Setting the Backlighting Options Setting the Date and Time Clock Enter CA Key or Number Pressed Key Common Ringing Patterns2nd Ring PrimCA Primary Call Appearance Confca Conference Call AppearanceIntercom Speed Dial Key Assignment Editing a Speed Dial Number Setting the Alarm Time Press MENU, AlarmThere are four levels of password protection Password SelectionSetting Protection Levels Operations Language OptionsVoice Operation Terms and NomenclatureNON-PROGRAMMABLE Hardkeys and Indicators Display Window and MenusPlacing Calls Answering Incoming CallsDialing Off-Hook Dialing On-HookTRANSFER, Conference and Drop Hold KEYTransferring Incoming Calls Way Conferencing Conferencing Two Outgoing Calls Conferencing an Incoming Call to an Outgoing CallRedial Teleset FeaturesDirectory Setup Directory ChangesDirectory Searches Setting the Dialing Options Dialing OptionsControl Type Semi Auto Phone Number 847 Next Change Use Keypad to Enter 1 Nxx Clear Save Call Records Dialing from the Call LogDial Prev Edit Clear Party Saving a CalLog Entry to the DirectoryAdvanced Features Analog PortAnalog Port on a Separate Spid Configuring Analog Port Sharing the Teleset’s Spid OperationAnalog Port on a Separate Spid Operation Call Blocking Tone IconsDSS/BLF Direct Station SELECT, Busy Lamp Field To program a DSS/BLF Disabling SoftkeysDSS/BLF Operation KEY Mapping View Disabling the Automatic Download Protecting Keys from Being OverwrittenProtecting specific keys from an Automatic Download Testing Disable LoggingKEY Clicks Troubleshooting Problems Maintaining the TelesetChecking the FW Version Loading FWGlossary Calls BlockedPage Index Liquid Crystal Display LCDSpeaker