NEC Essential Setup and User Options for Telephone Systems

Setup Options 3-9

Step 5 Press the control key for Description and enter a description label for this key using the dial keys. (This could be a person’s name, department, office, or phone number.) (See Entering Text Using the Dial Keys in this chapter.)

—This description will be displayed on the DSS Key list for this key.

—Press the soft key for OK to complete the settings for this DSS key.

Step 6 Repeat the previous steps to configure any additional DSS Keys.

Step 7 When all keys have been labeled, press the soft key for Back, then press the soft key for Save to save the settings.

Step 8 Press the soft key for OK to confirm that you really want to save your settings, then press the soft key for OK to confirm to reset your Inaset phone. (These changes will not take affect until your Inaset phone has been reset.)

)ROORZ￿WKHVH￿VWHSV￿WR￿VHW￿WKH￿QXPEHU￿WKDW￿ZLOO￿EH￿GLDOHG￿ZKHQ￿\RX￿SUHVV￿ D￿'66￿VSHHG￿GLDO￿NH\￿

Step 1 On the Home Application window, press the control key for Function Keys.

Step 2 Press the control key for Feature, then press the control key for DSS Keys.

Step 3 Press the control key for one of the DSS keys labeled in the previous steps. Using the dial keys, enter the extension or external phone number that will be dialed for the key.

Step 4 Once again press the control key for Function Keys, then press the control key for Feature. The top of the window displays SPEED SET.

Step 5 Repeat these steps, as needed, for all DSS Keys that you previously labeled.

It is necessary to perform this sequence of steps quickly, as the Feature mode will automatically close after 1 minute.

NOTE

Using the DSS Keys

7R￿XVH￿\RXU￿SUHVHW￿'66￿NH\V￿

Step 1 Lift the handset and hear dial tone.

Step 2 Press the control key for DSS Keys on the Home Application window.

Step 3 Press the control key for the desired DSS key. The preset number will be dialed automatically.

Inaset User Guide - Issue 1.0