Call Timer and Timer
The Call Timer and the Timer features are used to measure elapsed time on a call.
However, the Call Timer feature can be used ONLY if your telephone is connected to a DEFINITY ECS Release 6.3 or later. This feature, once activated, measures elapsed time automatically on all calls until you turn off the Call Timer feature.
The Timer feature must be turned on for each individual call you wish to time. At the end of the call, you must immediately turn off the feature. This feature can be used with any DEFINITY switch release.
Check with your system manager to see if you can use either of these features.
To use the Call Timer feature to measure elapsed time on telephone calls
1. Press the Menu button and then press the softkey below CTime or, if CTime is not available on your display, press the 
button (if administered).
The Call Timer will measure elapsed time automatically on all calls until you turn off the Call Timer feature.
2.When you want to turn off the Call Timer feature, press the Menu button and press the softkey below CTime
or, if you have activated this feature with Call Timer , press the
Call Timer button.
To use the Timer feature to measure elapsed time on an individual telephone call
1.Press the Menu button and then press the softkey below Timer (which exits you from softkey mode)
or, if Timer is not available on your display, press the Timer button (if administered).
2.To stop the timer and clear the display, press the Menu button and then press the softkey below Timer again
or, if Timer is not available on your display, press Timer again.
22