AT&T at&t partner plus communications system manual Line Type, Code #202

Line Type	Code: #202
	Description: Identifies each outside line as being connected to the local tele-
	phone company or to a PBX or a Centrex system. See appendix A for more
	information on programming for PBX or Centrex.
	Valid Entries: ✓ 1 = CO (local telephone company line)
	2 = PBX or Centrex line
	Considerations:
	■ If any lines are connected to a PBX or a Centrex system, use procedure
	#106, PBX Dial-Out Code, to identify the PBX/Centrex dial-out code.
	■ If any lines are connected to a Centrex system, use procedure #107, Recall
	Timer Duration, to change the recall timer to 800 milliseconds.
	Programming Steps:
	1. Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 2 ] [ 0 ] [ 2 ] . The
	display reads:
	Line Type
	Line:
	2. Enter the first line to be programmed. For example, to program line 1,
	press [ 1 ]. The display reads:
	Line Type	L1
	1 co
	3. To change the line type, press	[ Next Data ] . The display reads:
	Line Type	L1
	2 PBX

To program another line, press [ Next Item ] or [ Prev Item ] until the correct line number shows on the display. Follow step 3 to change the line type. Repeat for every line in the sys- tem.

3-10 System Programming