AT&T at&t partner plus communications system manual Press Feature 0 0 . The display reads

Programming Steps:

1.Press [ Feature ] [ 0 ] [ 0 ] . The display reads:

PROGRAM EXT 10

2.Enter the 2-digit code you want to assign the phone number by pressing

[ Feature ] and 2 digits between 20 and 79. For example, to assign code 20, press [ Feature ] [ 2 ] [ 0 ] . If a number is already assigned to the code, it appears in the display. If no number is assigned to the code, the display reads:

Blank

3.Enter the phone number. For example, to program 555-4757 to code 20, press [ 5 ] [ 5 ] [ 5 ] [ 4 ] [ 7 ] [ 5 ] [ 7 ] . The display reads:

5554757

To mark the speed dial number, precede the number by *. For example, to mark the number 555-1001, enter [ * ] [ 5 ] [ 5 ] [ 5 ] [ 1 ] [ 0 ] [ 0 ] [ 1 ]. The display reads:

*5551001

To include special functions in the phone number, see table 3-1on p. 3-36.

To program another System Speed Dial number, start from step 2.

To program over an existing number, enter the new number after selecting the 2-digit code.

To remove a System Speed Dial number, enter the number’s 2-digit code and press [ Mic ] once.

To exit the program mode at any time, press [ Feature ] [ 0 ] [ 0 ] .

System Programming 3-35