AT&T at&t partner plus communications system manual Programming Method B

Considerations:

■PBX or Centrex extension numbers cannot be used as System Speed Dial numbers, Personal Speed Dial numbers, or Auto Dial numbers.

■Last Number Redial and Save Number Redial will not work properly when the “last” or “saved” number was a PBX or Centrex extension number. How- ever, a user can dial a PBX or Centrex extension number directly.

Programming Method B

Use when most calls are made to PBX or Centrex extensions.

1.Follow steps 1 through 3 in “Programming Method A,” above.

2.Program the Line Type (#202) to be “CO” for every line connected to the PBX or Centrex system.

Considerations:

■Outside numbers, PBX/Centrex extension numbers, and PARTNER Plus extension numbers can be used as System Speed Dial numbers, Personal Speed Dial numbers, and Auto Dial numbers.

■To program an outside number, first program the PBX dial-out code, then two pauses, then the number. For example, if the dial-out code

is “9,” to program “555-1212“ as a System Speed Dial number, enter

[ 9 ] [ H o l d ] [ H o l d ] [ 5 ] [ 5 ] [ 5 ] [ 1 ] [ 2 ] [ 1 ] [ 2 ].

■To program a PBX/Centrex extension number or a PARTNER Plus exten-

sion number, do not enter [ 9 ] [ Hold ] [ Hold ] before the number.

■Last Number Redial and Save Number Redial cannot be used for outside numbers. However, they can be used for PBX/Centrex extension numbers and PARTNER Plus extension numbers.

A-2 Programming for PBX or Centrex