AT&T at&t partner plus communications system Programming Procedures, System Date, System Day

Programming Procedures

System Date

If your system has been previ- ously programmed, the displays may differ.

See the box at the bottom of this page for a summary of options of what to do next.

Code: #101

Description: The month, day, and year that appears on PARTNER display phones

Valid Entries: Any date

Programming Steps:

1.Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 1 ] [ 0 ] [ 1 ] . display reads:

System Date

Data 010100

2.Enter today’s date in the form MMDDYY, using leading zeroes for all single-digit months and dates. For example, to enter December 4, 1990, press [ 1 ] [ 2 ] [ 0 ] [ 4 ] [ 9 ] [ 0 ] . The display reads:

System Date

Data 120490

System Day	Code: #102
	Description: The day of the week that appears on PARTNER display phones
	Valid Entries: ✓ 1	= Sunday	4 = Wednesday	6 = Friday
	2 = Monday		5 = Thursday	7 = Saturday
	3	= Tuesday

Programmi ng Steps:

1.Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 1 ] [ 0 ] [ 2 ] . display reads:

System Day

1 Sun

2.Change the day by entering a new setting number as listed above. For example, to set the day to Tuesday, press [ 3 ] . The display reads:

System Day

3 Tue

Or press [ Next Data ] or [ Prev Data ] until the correct day of the week shows on the display.

✓ = Factory Setting

Togo to the next procedure: [ Next Proc ]	To go to a specific procedure: [# ] [ X ] [ X ] [ X ]
Togo to the previous procedure: [ Prev Proc ]	(where X X X is the procedure number)
To return data to the factory setting: [Remove ]	To exit system programming: [ Feature ] [ 0 ] [ 0 ]

3-4 System Programming