Eurotech Appliances 01.06 A, Multi-Cell PRI Gateway Connecting the Cables, Basic Connections

Page 10

Chapter 1: Connecting the Cables

You have several cables to connect to the Multi-Cell PRI Gateway. Some are mandatory and some are optional based on the specific use case.

Basic Connections

∙Power Cable 110/220V - The power cable is supplied and should cover all main voltage electricity services in the world. However you should check the plug supplied with the socket where you installing the system. Connect a 120 V (North America), or 240 V (Europe) power supply cable to the Multi-Cell gateway.

∙Ground cable - The ground cable is not supplied and can be any ground cable that can be available in Electricity shop and best suite for your ground socket available.

Connect the ground wire to a suitable ground socket or connection available.

∙ISDN cable - The regular ISDN cable is used to connect the system to the PBX, serving the Office landline phones.

For the regular ISDN cable, connect the ISDN line from the telephone switching unit in your office to the Multi-Cell unit. Connect the ISDN line to the socket labeled "ISDN" in the front of the Multi-Cell unit, as shown below.

∙Comports cable - The RS-232 to Ethernet serial connection cable between Management Application PC via RS-232 serial COM port and RJ-45on the Multi-Cell PRI Gateway system. This connection is used for the recommended 1￿st time setting.

∙RJ-45 Ethernet cable - The regular RJ45 Ethernet cable to be connected between PC with the Multi-Cell PRI Gateway Management application and the Multi-Cell PRI gateway system (Cable side labeled "NET"), via a routing and switching fabric. This is the additional option to connect the management application PC to the system and has the benefit of enabling operating management of configuration, monitoring and reporting from any location where the Multi-Cell PRI gateway system IP is known.

RJ-45 Ethernet cable (Optional for IP based Management Application connection).

Comport cable from auxiliary computer

An ISDN Telephone line

After you have connected the cables properly, turn on the Multi-Cell PRI Gateway

PRI – GSM Multi-Cell Gateway

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Multi-Cell PRI Gateway Usage Warnings PRI GSM Multi-Cell Gateway Table of Content ∙ Mandatory ‒ General configurations ∙ Mandatory ‒ Install The Management ApplicationGetting Started ∙ Known issues and Troubleshooting ∙ Optional Setting the TCP/IP connections∙ Optional Task- Configurations Refer to Troubleshooting and known issuesFor getting the most updated Product Info on the Web Check your package Items ∙ 110/220V Power supply cableRJ-45 Isdn E1 cross connect cable Isdn PRI GSM Gateway Solution Overview One Location in the WorldConnecting the Cables Basic ConnectionsRJ-45 Ethernet cross connect cable Installing the Manager Application PRI GSM Multi-Cell Gateway PRI GSM Multi-Cell Gateway Basic configurations with the management application Between the management PC and the Multi-Cell systemManagement via RS-232 serial connection Management via Internet connection PRI GSM Multi-Cell Gateway Configuration Defining Groups of Ports PRI GSM Multi-Cell Gateway Configuration Port and SIM Define Dial Settings for Each PortDefine Phone numbers Type of Dispatch Define Minimum Amount of Time between Outgoing CallsConfiguration ‒ SIM Card Settings Define SIM SpecificationsDon not use timetables Define type of Channel Lock Set the time passed since SIM begun to be ActiveDefine a channel lock Configuration Isdn Connection Settings Overview of the Isdn Card∙ Incoming Min. Digits Number OverlapBlock ∙ Outgo the Max. Digits NumberConfiguration Isdn B-Channel-Port Association 1 Assigning B-channels to In-house NumbersE1 line 2 Assigning Ports and Defining Prefixes PRI GSM Multi-Cell Gateway Monitoring Calls ∙ IsdnPort and B-Channel Cell ID SIM׳s StatisticsGenerating Call Reports TCP/IP settings task list TCP/IP SettingRefer to Connecting the Cables for more details PRI GSM Multi-Cell Gateway Operational test PRI GSM Multi-Cell Gateway Troubleshooting and known issues HandsetManagement Appluaction Debug Window PRI GSM Multi-Cell Gateway PRI GSM Multi-Cell Gateway How can I check if my MultiCell׳s firmware is up-to-date?
Top Page Image Contents