Chapter 5.2: Define Phone numbers Type of Dispatch
Select the mode in which telephone numbers are dispatched to the GSM network.
To dispatch phone numbers manually, in the Send Complete list, select HASH mode. In this mode, after the user has dialed all digits of a phone number, press “#״ to send the phone numbe.
To dispatch phone numbers automatically, in the Send Complete list, select OMIT. Then set three additional parameters:
a. Length of phone numbers that will be dialed from the port within range.
i. In the Min. Digits box, enter the number of digits of the shortest phone number that will be dialed from this port.
ii.In the Max. Digits box, enter the number of digits of the longest phone number that will be dialed from this port
b.Inter Digit Pause. This parameter defines a waiting time,
after a digit is pressed, before the number is automatically dispatched to the GSM network.
If this parameter is set too low, then incomplete phone numbers may be dispatched if the user pauses briefly while dialing.
If this parameter is set too high, then users would have to wait a long time before a number is dispatched.
The inter digit pause is activated after the minimum number of digits have been dialed.
In many situations, two or three seconds may be appropriate for this parameter.
Each unit of this parameter is 50 milliseconds. For example, to set an inter digit pause of 3 seconds, enter a value of 60 in this box
(60 * 50 milliseconds = 3,000 milliseconds = 3 seconds).
When a port is set to
c. Define Minimum Amount of Time between Outgoing Calls
Enter the minimum amount of time between outgoing calls in the Intercall Timer box. Set this parameter according to limitations of the GSM network. In many situations, two seconds may be an appropriate value for this parameter.
The Time Table Chart Button: Click this button to view the settings of time table for SIMs, already set (The future versions will show the settings of all the SIMs).
After making port settings, press Write Port Setting to send the settings to the Multi- Cell unit. Then make settings for each SIM, as explained in the following section.
PRI – GSM | 22 |