Eurotech Appliances Multi-Cell PRI Gateway Getting Started, ∙ Mandatory ‒ General configurations

Getting Started

Eurotech Communication team is glad you have chosen to use the Eurotech￿s Multi-Cell PR gateway for your needs, we will do our best to make your installation efforts as well as day-to-day configuration and monitoring tasks be pleasant tasks as possible. We wish you a smooth operation while greatly saving your office mobile phone calls.

This chapter is your Map for installation, configuration and monitoring tasks and includes a short explanation on each stage as well as references for more elaborated explanations, drawings and examples in other chapters. The following is a list of tasks you shall perform, where you shall go over it sequentially or skip tasks that are optional and not required for your current needs. It is advised that you will use the following tasks as your Do To List.

Make a print of this chapter and put notes on each stage when completed (e.g. V mark when done).

∙Mandatory - Check that all Package items are included

Refer to “Check your Package Items״ chapter for checking that all items that should be in your package.

∙Mandatory ‒ Install The Management Application

On the PC / Laptop allocated for the system management install the MS-Windows Management Application with the provided CD.

Refer to “Chapter 2: Installing the Manager Application״ chapter for all items that should be in your package.

∙Mandatory connections

oInstall Power Cable o Install Ground Cable o Install Antennas

o Install ISDN cable

o Install RS-232 (Comport cable) serieal or RJ-45 Ethernet cable

Refer to “Chapter 1: Connecting the Cables״ for specific and detailed guidelines.

∙Mandatory ‒ General configurations

In order to operate the system a mandatory basic setups should be performed in one of the two

optional connections, serial RS-232 or via Internet. The 1￿st time configuration is recommended to be performed via RS-232 while later on configuration, monitoring and reports is recommended to be performed via IP.

Refer to ￿Chapter 3: Basic configurations with the management application￿.

∙Mandatory - 1׳st time system configuration via RS-232

Use the RS-232 connection and PRI Management MS-Windows application as your 1￿st time configuration. You can use this method for later day-to-day management, however

the option to manage your PRI ￿ GSM Gateway system via IP is highly recommended as you can have the management done remotely from the system via internet connection.

Refer to ￿Chapter 3.1: Management via RS-232￿chapter.

“Chapter 3: Basic configurations with the management application״ and

PRI – GSM Multi-Cell Gateway 5