Eurotech Appliances Multi-Cell PRI Gateway, 01.06 A TCP/IP Setting, TCP/IP settings task list

Page 35

Chapter 10: TCP/IP Setting

TCP/IP settings task list:

1.Disconnect the COM cable from the Multi-Cell system.

2.Install RJ-45 cable to the Management PC connected to the Multi-Cell network.

3.Execute to the same LAN ￿Network Enabler Administrator￿ program, provided on the installation CD at the directory ￿LAN Tools￿;

4.If your IP addresses are between 192.168.0.1 and 192.168.0.255, connect the Multi-Cell to LAN access point and continue to step 6, if other, then proceed to the next step;

5.Connect the Multi-Cell system to the management PC, with Network Enabler installed on it, via a NET Cross connect cable, supplied in the package.

Refer to : ￿Chapter 1: Connecting the Cables￿ for more details.

6.Set the PC￿s IP to 192.168.0.XXX, where XXX is the three last digits of the ESN, written on a sticker, attached to the Multi-Cell, added to 101;

7.Engage the Network Enabler;

8.Click the [Search] button to begin the search;

9.The Multi-Cell￿s IP should appear in the next screen:

10.Double click on the IP. Then Press the Network tab. The next screen will open:

PRI – GSM Multi-Cell Gateway

35

Image 35
Contents Multi-Cell PRI Gateway Usage Warnings PRI GSM Multi-Cell Gateway Table of Content Getting Started ∙ Mandatory ‒ Install The Management Application∙ Mandatory ‒ General configurations Refer to Troubleshooting and known issues ∙ Optional Setting the TCP/IP connections∙ Optional Task- Configurations ∙ Known issues and TroubleshootingFor getting the most updated Product Info on the Web RJ-45 Isdn E1 cross connect cable ∙ 110/220V Power supply cableCheck your package Items One Location in the World Isdn PRI GSM Gateway Solution OverviewBasic Connections Connecting the CablesRJ-45 Ethernet cross connect cable Installing the Manager Application PRI GSM Multi-Cell Gateway PRI GSM Multi-Cell Gateway Between the management PC and the Multi-Cell system Basic configurations with the management applicationManagement via RS-232 serial connection Management via Internet connection PRI GSM Multi-Cell Gateway Configuration Defining Groups of Ports PRI GSM Multi-Cell Gateway Define Dial Settings for Each Port Configuration Port and SIMDefine Minimum Amount of Time between Outgoing Calls Define Phone numbers Type of DispatchDefine SIM Specifications Configuration ‒ SIM Card SettingsDefine a channel lock Set the time passed since SIM begun to be ActiveDon not use timetables Define type of Channel Lock Overview of the Isdn Card Configuration Isdn Connection Settings∙ Outgo the Max. Digits Number OverlapBlock ∙ Incoming Min. Digits Number1 Assigning B-channels to In-house Numbers Configuration Isdn B-Channel-Port AssociationE1 line 2 Assigning Ports and Defining Prefixes PRI GSM Multi-Cell Gateway ∙ Isdn Monitoring CallsPort and B-Channel SIM׳s Statistics Cell IDGenerating Call Reports Refer to Connecting the Cables for more details TCP/IP SettingTCP/IP settings task list PRI GSM Multi-Cell Gateway Operational test PRI GSM Multi-Cell Gateway Handset Troubleshooting and known issuesManagement Appluaction Debug Window PRI GSM Multi-Cell Gateway PRI GSM Multi-Cell Gateway How can I check if my MultiCell׳s firmware is up-to-date?