
Q.: How can I check if my MultiCell׳s firmware is up-to-date?
A.: Connect to the MultiCell, using the PRI management application. Go to the Debug screen. Check the “Enable Debug checkbox, uncheck the Enable filter checkbox.
At the field, near the SEND button, enter R_SID11 and press enter.
Two rows will be the feedback. At the same field enter R_SYS and press enter. One row of feedback will be shown. Uncheck the Enable Debug checkbox. You should get something like the following text message:
The first circled value is the Slaves firmware version the second value is the Masters firmware version.
PRI – GSM | 43 |