Eurotech Appliances Multi-Cell PRI Gateway, 01.06 A user manual Operational test

Page 37

Chapter 11: Operational test

From a PSTN Office phone attached to a PBX/ VoIP Gateway try make a call to defined GSM Cellphone in the GSM network around.

In case of a failure to do so verify the following:

∙The PRI is configured properly to your PBX / VoIP gateway

∙The connection is not properly attached or disconnected

∙The cable itself is malfunction

If your verifications did not yet any results, It might be that the GSM module is not compatible with the GSM network around.

Make the following handset test which is mainly to check the operation and compatibility of the Multi-Cell System with the local GSM network.

Use a handset with RJ-11connection and plug it to the HS-Slotin the PRI system. Follow the handset test instruction as follows:

Make a test call as follows:

Press the Handset button:

The next screen will appear:

Enter the default username and password which are: admin

Note: Make sure “Caps Lock״ is off and that you entered a lower case characters!

Fill out those dialog boxes and click Logon button; youll see the next screen:

PRI – GSM Multi-Cell Gateway

37

Image 37

Contents Multi-Cell PRI Gateway Usage Warnings PRI GSM Multi-Cell Gateway Table of Content ∙ Mandatory ‒ General configurations ∙ Mandatory ‒ Install The Management ApplicationGetting Started ∙ Optional Task- Configurations ∙ Optional Setting the TCP/IP connections∙ Known issues and Troubleshooting Refer to Troubleshooting and known issuesFor getting the most updated Product Info on the Web Check your package Items ∙ 110/220V Power supply cableRJ-45 Isdn E1 cross connect cable One Location in the World Isdn PRI GSM Gateway Solution OverviewBasic Connections Connecting the CablesRJ-45 Ethernet cross connect cable Installing the Manager Application PRI GSM Multi-Cell Gateway PRI GSM Multi-Cell Gateway Between the management PC and the Multi-Cell system Basic configurations with the management applicationManagement via RS-232 serial connection Management via Internet connection PRI GSM Multi-Cell Gateway Configuration Defining Groups of Ports PRI GSM Multi-Cell Gateway Define Dial Settings for Each Port Configuration Port and SIMDefine Minimum Amount of Time between Outgoing Calls Define Phone numbers Type of DispatchDefine SIM Specifications Configuration ‒ SIM Card SettingsDon not use timetables Define type of Channel Lock Set the time passed since SIM begun to be ActiveDefine a channel lock Overview of the Isdn Card Configuration Isdn Connection SettingsBlock Overlap∙ Incoming Min. Digits Number ∙ Outgo the Max. Digits Number1 Assigning B-channels to In-house Numbers Configuration Isdn B-Channel-Port AssociationE1 line 2 Assigning Ports and Defining Prefixes PRI GSM Multi-Cell Gateway ∙ Isdn Monitoring CallsPort and B-Channel SIM׳s Statistics Cell IDGenerating Call Reports TCP/IP settings task list TCP/IP SettingRefer to Connecting the Cables for more details PRI GSM Multi-Cell Gateway Operational test PRI GSM Multi-Cell Gateway Handset Troubleshooting and known issuesManagement Appluaction Debug Window PRI GSM Multi-Cell Gateway PRI GSM Multi-Cell Gateway How can I check if my MultiCell׳s firmware is up-to-date?