Functions: EXES-6000 CP-64
Notes.
1.XX/YY indicates to select either XX (Function) or YY (Function).
2.Not all circles ( ) in The Switch Selection table
correspond to the DIP switches of the CP unit.
*1: "PV" (system with Privacy function) Type: with the
Privacy switch in the ON position, a brief Privacy Tone sounds.
"NP" (system without Privacy function) Type: A station may be called by the continuous calling tone when the Privacy switch is placed in the ON position.
*2: When a
start by touching any key
*3: Using the
*4: This function may not be used if numbers 100
through 199 are used in the Station Numbering Schedule. Either "Personal number call" or "Personal number paging" may be selected.
*5: Additional equipment is required for paging.
*6: Either "Executive Priority" or "Highest Executive Priority" may be selected.
*7: Each zone of paging provides Station paging and/or
PA paging.
*8: It is necessary to respond only by touching (without zone No.).
*9: It is possible to make a paging and its response across the other exchange. However, a response to the zone paging is possible only from a station connected to the exchange having the paged zone.
*10: Station numbers of each exchange can be changed
freely within the range of "Selectable numbering schedule of each exchange".
*11: Calling tone: 0.3 sec (Trill note tone)/0.2 sec (Single
note tone)/none.
Paging
*12: Selects whether or not the indication of the calling party station continuously lights up, after the calling party has cancelled the call to a line which is busy or in the privacy mode.
*13: A call can only be made from the stations No. 200
~455 connected to the "A" type exchange. It is possible to respond from any station.
– 17 –