Vizio EXES-6000 CP-64 Tie-line Connections of Exchanges, Purpose of tie-line connection

Tie-line Connections of Exchanges

1.Purpose of tie-line connection

When the EXES-6000 system uses the Central Processing Unit Model CP-64, not only the use of a single exchange (up to 256 stations) but also the tie-line connections of 2 exchanges (up to 512 stations) or 3 exchanges (up to stations) are possible.

This tie-line function may be used when

1)You wish to connect 2 or 3 exchanges in the remote areas (maximum distance connected between ex- changes using the cable of 0.65mm diameter is approximately 2 km.)

2)One exchange is not sufficient enough to cover the desired number of stations and a separate exchange is required for increase in the number of stations.

Station	Station	Station
(No. 200 ~ 455)	(No. 470 ~ 725)
		(No. 740 ~ 995)

2. Number of stations, paging zones and links

		Maximum number	Maximum number	Maximum number of
Composition of exchange(s)		of links within	of links between
				paging zones
		own exchange	tie-lined exchanges
(1) Without tie-lines
		16	—	All call +31 zones
(EX-1)
(2) 2 exchanges
		16	16	All call +30 zones *4
		*1	*2	(15 zones per exchange)
(EX-2A)	(EX-2B)
(3) 3 exchanges	(EX-3A)
		16	8 between each
			tie-lined link	All call +45 zones *4
		*1	*3	(15 zones per exchange)
(EX-3C)	(EX-3B)

*1 The links within own exchange as well as the tie-line links are used in each tie-line communication. *2 One (8 links) or two tie-line units (TI-62) are needed per exchange.

*3 Two tie-line units (TI-62) are needed per exchange.

*4 All call paging is provided to all the paging zones of all the exchanges connected by tie-line.

Tie-line

Station

(No. 200 ~ 455)

Station

(No. 470 ~ 725)

Maximum number of

stations

256

512

768

– 61 –