Polycom 72-1065-09, H340, I640, E340 manual Configuration Process

Page 27

SpectraLink Corporation

Configuration and Administration–NetLink e340/h340/ i640 Wireless Telephone

 

NetLink Telephony Gateway and SpectraLink Radio Protocol

4.2Configuration Process

1.Download the latest NetLink Wireless Telephone software from http://www.spectralink.com/softwareUpdates,

2.Place the latest version of the NetLink e340, h340 or i640 Wireless Telephone SRP code on the TFTP server and ensure the TFTP server is started. The four files that are needed must be named:

pd11spc.bin

pd11gl3.bin

pd11spc3.bin

phintl24.bin.

See SpectraLink 8000 Telephony Gateway: Administration Guide for SRP to set the TFTP server information and/or use the NetLink Telephony Gateway’s built-in TFTP server.

3.If statically assigning IP addresses, ensure that the Phone IP, Subnet Mask, and Default Gateway information are accurate in the Admin menu. If using a DHCP server, ensure that the DHCP option is set. See section 3 NetLink Wireless Telephone Configuration for detailed configuration instructions.

4.Ensure the handset has properly configured ESSID and Reg Domain Information within the Admin menu. If you are accepting broadcast ESSIDs at your access points, the handset will automatically learn the ESSID information when powering on. See section 3 NetLink Wireless Telephone Configuration for detailed configuration instructions.

5.Using the Admin menu on the handset, ensure the License Option menu option is set to 007. This ensures the handset will check for the proper SRP files each time it powers on.

6.Ensure security settings are properly programmed. See section 3 NetLink Wireless Telephone Configuration for detailed configuration instructions.

7.Exit the Admin menu.

8.The SRP code will now download to the handset. The status bar will increment fully across the display for each function that is being performed in the download process. Upon completion of the update process, the handset will re- boot with the new firmware.

For future software upgrades, simply update the files that are stored on the TFTP server. Each time the handset is powered up, it will check with the TFTP server to ensure it has the proper software version.

PN: 72-1065-09-J.doc

Page 27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Configuration and Administration NetLink e340/h340/i640 Wireless TelephoneSVP Trademark InformationImportant Safety Information Table of Contents Customer Support Hotline About This DocumentSpectraLink Corporation Model Numbers Related DocumentsNetLink Wireless Telephone Overview SpectraLink Voice Priority SVPQoS and Security Quick Start Guide NetLink e340/h340 Wireless Telephone NetLink Wireless Telephone SpecificationsHandset Display Icon Icons shown in bold turns off when Audio featuresLine indicators Startup SequenceHandset Modes Standby on-hookActive off-hook FCN display Handset DisplaysLine display Menu displayNetLink Wireless Telephone Configuration Admin MenuOpening the Admin menu Entering and editing Admin menu options Alphanumeric string entryTo Enter Press Admin Menu Items Nd Level Rd Level Th Level Admin menuPhone Config License Option Essid Select either WEP Off or WEP On Regulatory Domain User-defined Preferences Standby menu item Nd Level Rd Level Th Level Standby menuOff silent PBX PBX determines ring cadence e.g. the PBX may send System Info Current Channel X 1 2 3 4 5 6 7 8 New Channel = ? Requirements License ManagementConfiguration Process Testing a Handset Run Site Survey Diagnostic Tools7 b c Diagnostics Mode Solving coverage issuesScreen M m m Screen Message type Errors Events Full Syslog ModeMessages are formatted like the following example Conducting a Site Survey Certifying the HandsetsNormal download messages Software MaintenanceDownload failure or recovery messages Upgrading handsetsTroubleshooting Access Point ProblemsConfiguration Problems Dialtone Problems Infrastructure ProblemsMessage Description Action Handset Status MessagesMessage Description Action Do not Power OFF Message Description Action Wireless Telephone Configuration section Message Description Action Index
Related manuals
Manual 29 pages 38.42 Kb
Top Page Image Contents