Installing the VoIP V3 Indoor Intercom 19
RTFM Button
2.3.5 RTFM Button
When the Intercom is operational and linked to the network, use the Reset Test Function Management (RTFM) button (see SW1 in Figure
Note You must do these tests prior to final assembly.
Figure |
2.3.5.1 Announcing the IP Address
To announce a device’s current IP address:
1. Press and release the RTFM button (see SW1 in Figure
Note The device will use DHCP to obtain the new IP address
Note Pressing and holding the RTFM button for longer than five seconds will restore the device to the factory default settings.
| Figure |
|
Operations Guide | 930500E | CyberData Corporation |