CyberData 11113, 11111 manual Contents

i

Contents
Chapter 1 Product Overview		1
1.1	How to Identify This Product	1
1.2	Typical System Installation	2
1.3	Product Features	3
1.4	Supported Protocols	4
1.5	Supported SIP Servers	4
1.6	Product Specifications	5
1.7	Dimensions	6
Chapter 2 Installing the VoIP V3 Indoor Intercom		9
2.1	Parts List	9
2.2	Intercom Components	10
	2.2.1 Call Button and the Call Button LED	11
2.3	Intercom Setup	12
	2.3.1 Intercom Connections	12
	2.3.2 Connecting the Intercom to the Auxiliary Relay	13
	2.3.3 Identifying the VoIP Intercom Connectors	15
	2.3.4 Network Connectivity, and Data Rate	17
	2.3.5 RTFM Button	19
	2.3.6 Adjust the Volume	20
2.4	Configure the Intercom Parameters	21
	2.4.1 Factory Default Settings	21
	2.4.2 Intercom Web Page Navigation	22
	2.4.3 Log in to the Configuration Home Page	23
	2.4.4 Configure the Device	26
	2.4.5 Configure the Network Parameters	29
	2.4.6 Configure the SIP Parameters	31
	2.4.7 Configure the Nightringer Parameters	36
	2.4.8 Configure the Sensor Configuration Parameters	38
	2.4.9 Configure the Multicast Parameters	41
	2.4.10 Configure the Audio Configuration Parameters	43
	2.4.11 Configure the Event Parameters	48
	2.4.12 Configure the Autoprovisioning Parameters	53
2.5	Upgrade the Firmware and Reboot the Intercom	58
	2.5.1 Uploading the Firmware	58
	2.5.2 Reboot the Intercom	60
2.6	Command Interface	61
	2.6.1 Command Interface Post Commands	61
Appendix A Mounting the Indoor Intercom		65
A.1 Wall Mounting Components		65
A.2 Cable Connections		66
A.3 Wall Mounting Option		67
A.4 Wall Cutout Dimensions		68
A.5 Gang Box Option		69
A.6 PCB Dimensions		70
Appendix B Setting up a TFTP Server		71
B.1 Set up a TFTP Server		71
	B.1.1 In a LINUX Environment	71

Operations Guide 930500E CyberData Corporation