CyberData 11113, 11111 Remote Event Server, When selected, Call Terminated Events are enabled

	Installing the VoIP V3 Indoor Intercom 49
	Configure the Event Parameters
	Table 2-16. Event Configuration
Web Page Item	Description
Enable Event Generation	When selected, Event Generation is enabled.
Remote Event Server
Remote Event Server IP	Type the Remote Event Server IP address.
	(64 character limit)
Remote Event Server Port	Type the Remote Event Server port number.
	(8 character limit)
Remote Event Server URL	Type the Remote Event Server URL.
	(127 character limit)
Events
Enable Button Events	When selected, Button Events are enabled.
Enable Call Active Events	When selected, Call Active Events are enabled.
Enable Call Terminated Events	When selected, Call Terminated Events are enabled.
Enable Relay Activated Events	When selected, Relay Activated Events are enabled.
Enable Relay Deactivated	When selected, Relay Deactivated Events are enabled.
Events
Enable Ring Events	When selected, Ring Events are enabled.
Enable Night Ring Events	When selected, there is a notification when the unit receives a
	night ring.
Enable Multicast Start Events	When selected, Multicast Start Events are enabled.
Enable Multicast Stop Events	When selected, Multicast Stop Events are enabled.
Enable Power On Events	When selected, Power On Events are enabled.
Enable Security Events	When selected, Security Events are enabled.
Enable 60 Second Heartbeat	When selected, 60 Second Heartbeat Events are enabled.
Events
	Click the Save button to save your configuration settings.
	Note: You need to reboot for changes to take effect.
	Click on the Test Event button to test an event.
	Click on the Reboot button to reboot the system.

Operations Guide 930500E CyberData Corporation