CyberData 11113, 11111 manual Delayed Dtmf

Installing the VoIP V3 Indoor Intercom 35

Configure the SIP Parameters

2.4.6.3 Delayed DTMF

On the SIP Configuration page the dial out extension supports the addition of comma delimited pauses and sending additional DTMF tones (using rfc2833). The first comma will pause three seconds after a call is first established with a remote device. Subsequent commas will pause for 2 seconds. A pause of one second will be sent after each numerical digit.

	Table 2-11. Examples of Dial-Out Extension Strings
Extension String	Resulting Action
302	Dial out extension 302 and establish a call
302,2	Dial out extension 302 and establish a call, wait 3 seconds then send the
	DTMF tone '2'
302,25,,,4,,1	Dial out extension 302 and establish a call, wait 3 seconds then send the
	DTMF tone '2', send out DTMF tone 5, wait 6 seconds, send out DTMF
	tone 4, wait 4 seconds, send out DTMF tone 1

Note The maximum number of total characters in the dial-out field is 25.

Operations Guide 930500E CyberData Corporation