CyberData 11113 manual Dial Out Extension Strings and Dtmf Tones using rfc2833, Call Disconnection

	Installing the VoIP V3 Indoor Intercom 33
	Configure the SIP Parameters
Table 2-9. SIP Configuration Parameters (continued)
Web Page Item	Description
Call Disconnection
Terminate call after delay (in seconds)	Type the desired number of seconds that you want to transpire
	after a connection delay before a call is terminated.
	Note: A value of 0 will disable this function.
RTP Settings
RTP Port (even)	Specify the port number used for the RTP stream after
	establishing a SIP call. This port number has to be an even
	number and defaults to 10500.
Dial Out Settings
Dial Out Extension	Type the dial out extension number (64 character limit).
	Note: For information about dial-out extension strings and
	DTMF tones, see Section 2.4.6.1, "Dial Out Extension Strings
	and DTMF Tones (using rfc2833)".
Extension ID	Type the desired Extension ID (64 character limit).
	Click the Save button to save your configuration settings.
	Note: You need to reboot for changes to take effect.
	Click on the Reboot button to reboot the system.

3.After changing the parameters, click Save Settings.

2.4.6.1Dial Out Extension Strings and DTMF Tones (using rfc2833)

On the SIP Configuration Page, dial out extensions support the addition of comma delimited pauses and sending additional DTMF tones (using rfc2833). The first comma will pause three seconds after a call is first established with a remote device. Subsequent commas will pause for 2 seconds. A pause of one second will be sent after each numerical digit.

	Table 2-10. Examples of Dial-Out Extension Strings
Extension String	Resulting Action
302	Dial out extension 302 and establish a call
302,2	Dial out extension 302 and establish a call, wait 3 seconds then send the
	DTMF tone '2'
302,25,,,4,,1	Dial out extension 302 and establish a call, wait 3 seconds then send the
	DTMF tone '2', send out DTMF tone 5, wait 6 seconds, send out DTMF
	tone 4, wait 4 seconds, send out DTMF tone 1

Note The maximum number of total characters in the dial-out field is 64.

Operations Guide 930500E CyberData Corporation