CyberData 11113 After changing the parameters, click on the Save button, Nightringer Settings

Installing the VoIP V3 Indoor Intercom 37

Configure the Nightringer Parameters

2.On the Nightringer Configuration page, enter values for the parameters indicated in Table 2-12.

Table 2-12. Nightringer Configuration Parameters
Web Page Item	Description
Enable Nightringer	When the nightringer is enabled, the unit will attempt to
	register a second extension with the SIP server. Any calls
	made to this extension will play a ringtone.
Nightringer Settings
SIP Server	Type the SIP server represented as either a numeric IP
	address in dotted decimal notation.
Remote SIP Port	Type the Remote SIP Port number (default 5060)
	(8 character limit).
Local SIP Port	Type the Local SIP Port number (default 5060)
	(8 character limit).
	Note: This value cannot be the same as the Local SIP Port*
	found on the SIP Configuration Page.
User ID	Type the User ID (up to 64 alphanumeric characters).
Authenticate ID	Type the Authenticate ID (up to 64 alphanumeric
	characters).
Authenticate Password	Type the Authenticate Password (up to 64 alphanumeric
	characters).
Re-registration Interval (in seconds)	Type the SIP Registration lease time in minutes (default is
	60 minutes) (8 character limit). Re-registration Interval (in
	seconds)*

Click the Save button to save your configuration settings.

Note: You need to reboot for changes to take effect.

Click on the Reboot button to reboot the system.

3. After changing the parameters, click on the Save button.

Operations Guide 930500E CyberData Corporation