Product Overview 3
Product Features
1.3 Product Features
The VoIP V3 Indoor Intercom has the following features:
•Supports SRST (Survivable Remote Site Telephony) in a Cisco environment. SRST parameters are entered statically into the CyberData product's internal webpage.
•SIP compliant
•Dual speeds of 10 Mbps and 100 Mbps
•PoE 802.3af-enabled (Powered-over-Ethernet)
•Adaptive full duplex voice operation
•Network/Web management
•Network configurable speaker volume
•Network configurable door or intrusion sensor settings
•Network configurable relay activation settings
•Dial out extension supports the addition of comma delimited pauses before sending additional DTMF tones
•Network configurable microphone input sensitivity adjustment
•Network downloadable product firmware
•Doubles as a paging speaker
•Call button
•Call activity indicator (Call Button LED)
Note An active call is indicated by the Call Button LED blinking at one second intervals.
•Tamper proof design
•Concurrent SIP and multicast paging
•Dry contact relay for auxiliary control
Note The relay contacts are dry and provided for a normally open and momentarily closed configuration. Neither the alternate power input nor PoE power can be used to drive a door strike.
•Autoprovisioning
•Configurable audio files
•Night Ringer
•Three year warranty
•Door closure and tamper alert signal
•
Operations Guide | 930500E | CyberData Corporation |