CyberData 11111 Warranty & RMA Returns within the United States, Spare in the Air Policy

Page 81

Troubleshooting/Technical Support 74

Warranty

C.4 Warranty

CyberData warrants its product against defects in material or workmanship for a period of two years from the date of purchase. Should the product fail within the warranty period, CyberData will repair or replace the product free of charge. This warranty includes all parts and labor.

Should the product fail out-of-warranty, a flat rate repair charge of one half of the purchase price of the product will be assessed. Repairs that are in warranty but are damaged by improper modifications or abuse, will be charged at the out-of-warranty rate. Products shipped to CyberData, both in and out-of-warranty, are shipped at the expense of the customer. Shipping charges for repaired products shipped back to the customer by CyberData, will be paid by CyberData.

CyberData shall not under any circumstances be liable to any person for any special, incidental, indirect or consequential damages, including without limitation, damages resulting from use or malfunction of the products, loss of profits or revenues or costs of replacement goods, even if CyberData is informed in advance of the possibility of such damages.

C.4.1 Warranty & RMA Returns within the United States

If service is required, you must contact CyberData Technical Support prior to returning any products to CyberData. Our Technical Support staff will determine if your product should be returned to us for further inspection. If Technical Support determines that your product needs to be returned to CyberData, an RMA number will be issued to you at this point.

Your issued RMA number must be printed on the outside of the shipping box. No product will be accepted for return without an approved RMA number. The product in its original package should be sent to the following address:

CyberData Corporation

3 Justin Court.

Monterey, CA 93940

Attn: RMA "xxxxxx"

C.4.2 Warranty & RMA Returns Outside of the United States

If you purchased your equipment through an authorized international distributor or reseller, please contact them directly for product repairs.

C.4.3 Spare in the Air Policy

CyberData now offers a Spare in the Air no wait policy for warranty returns within the United States and Canada. More information about the Spare in the Air policy is available at the following web address:

http://www.cyberdata.net/support/warranty/spareintheair.html

Operations Guide

930500E

CyberData Corporation

Image 81
Contents Replaces #011111 Document 930500E for Firmware Version VoIP V3 Indoor Intercom Operations GuideCopyright Notice Important Safety Instructions Hazard Levels Pictorial Alert IconsRevision Information Contents Appendix C Troubleshooting/Technical Support IndexA Windows Environment How to Identify This Product Product OverviewModel number Typical System Installation Generic PoE SwitchDoor Strike VoIP Intercom IP Phone IP PBX Server Product Features PoE 802.3af-enabled Powered-over-EthernetConcurrent SIP and multicast paging Supported Protocols Supported SIP ServersIntercom supports This number replaces the 011111 number Product SpecificationsDimensions-Unit Dimensions DimensionsR0.438 R11.1 R0.100 Plcs PCB Dimensions and Intrusion Sensor Range Parts List Installing the VoIP V3 Indoor IntercomIntercom Mounting Accessory Kit 1illustrates the VoIP V3 Indoor Intercom partsIntercom Components Information about the functionality Call ButtonSpeaker Calling with the The Call Button Call Button and the Call Button LEDCall Button LED Function Call Button and Call Button LEDIntercom Setup Intercom Connections= Door Sense Ground Reference Connecting the Intercom to the Auxiliary Relay Example of External Relay not supplied Auxiliary Relay Wiring ContactsJ10 Identifying the VoIP Intercom ConnectorsFactory Only-Boot Mode Factory Only-ResetJP10 Disables the intrusion sensor when installed PoE Network Connection RJ-45 ethernetLink Activity Network Connectivity, and Data RateEthernet cable Verify Network Activity Network ConnectorAnnouncing the IP Address Rtfm ButtonRestoring the Factory Default Settings Adjust the VolumeConfigure the Intercom Parameters Factory Default SettingsIP Addressing Intercom Web Page Navigation Log in to the Configuration Home 13. Home Current Settings Device Settings14. Device Configuration Configure the DeviceRelay Settings Volume SettingsMiscellaneous Settings CallAfter changing the parameters, click the Save button 15. Network Configuration Configure the Network ParametersDhcp Timeout Stored Network SettingsCurrent Network Settings Select either Dhcp IP Addressing or Static IP Addressing byClick SIP Config to open the SIP Configuration page Figure Configure the SIP ParametersSIP Settings Enable SIP Operation Enables or disables SIP operationIf all of the Primary SIP Server and Backup SIP Server Backup SIP Server 1 and Backup SIP Server 2 fields blankAfter changing the parameters, click Save Settings Dial Out Extension Strings and Dtmf Tones using rfc2833RTP Settings Dial Out SettingsIntercom is set to not register with a SiP server Point-to-Point ConfigurationDelayed Dtmf 18. Nightringer Configuration Setup Configure the Nightringer ParametersAfter changing the parameters, click on the Save button Nightringer SettingsConfigure the Sensor Configuration Parameters 19. Sensor Configuration Intrusion Sensor Settings Door Sensor Settings20. Multicast Configuration Configure the Multicast Parameters9.1, Assigning Priority for more details Assigning Priority21. Audio Configuration Configure the Audio Configuration Parameters22. Audio Configuration Audio Files 23. Audacity User-created Audio FilesWAV Microsoft signed 16 bit PCM WAV Microsoft signed 16 bit PCM16shows the web page items on the Event Configuration Configure the Event ParametersWhen selected, Call Terminated Events are enabled Remote Event ServerEvents Example Packets for Events Operations Guide 930500E CyberData Corporation User-Agent CyberData/1.0.0 Content-Length 27. Autoprovisioning Configuration Configure the Autoprovisioning ParametersAutoprovisioning Enable AutoprovisioningGet Autoprovisioning from Dhcp Autoprovisioning Server IP AddressWould be a valid autoprovisioning file AutoprovisioningOperations Guide 930500E CyberData Corporation Autoprovisioned Audio Files Uploading the Firmware Upgrade the Firmware and Reboot the IntercomFile Upload 18. Firmware Upgrade Parameters Web Page Item DescriptionReboot the Intercom Click Reboot -29. a normal restart will occurReboot Command Interface Post Commands Command InterfacePlay the 4 audio file Wget Play the Intrusion Sensor Triggered audio file WgetPlay the Door Ajar audio file Wget Play the Night Ring audio file Wget Deletedoorajar=yes Delete the Night Ring audio file Wget Delete the Door Ajar audio file WgetWall Mounting Components Appendix a Mounting the Indoor IntercomQuantity Part Name Sheet Metal ScrewCable Connections Figure A-1shows how to properly connect the VoIP IntercomFigure A-2shows a wall mounting option Wall Mounting OptionDimensions are in Inches Millimeter Wall Cutout DimensionsTop Cable Entry Slot Gang Box OptionPCB Dimensions Set up a Tftp Server Appendix B Setting up a Tftp ServerA Linux Environment A Windows EnvironmentAppendix C Troubleshooting/Technical Support Frequently Asked Questions FAQDocumentation Contact Information Warranty & RMA Returns within the United States WarrantyWarranty & RMA Returns Outside of the United States Spare in the Air PolicyReturn and Restocking Policy Warranty and RMA ReturnsNumerics IndexIndex SIP Yellow act light 18 yellow link light Srst