Panasonic KX-TG2970 Registration for Additional Handsets Base Unit & Handset

Page 27
The included cordless handset is pre-registered at the factory and assigned the extension number 1. You do not need to register this handset which has “[1]” on the display. If you purchase accessory cordless handsets, you must register each to the base unit. Only one cordless handset can be registered at a time. A cordless handset will be assigned the extension number at registration. The model number of the accessory cordless handset is KX-TGA290. To order, contact your dealer or call 1-800-211-PANA(7262) to locate a dealer.
Charge the battery fully. Make sure the base unit and the other cordless handsets are not being used.
The cordless handset display shows the instructions Press MUTE on
as shown on the right.base unit, then OK on handset to register handset
O K

Registration for Additional Handsets Base Unit & Handset

KX-TG2970 includes a base unit and one cordless handset. You can expand the system by adding up to 2 additional cordless handsets, sold separately. A maximum of 3 cordless handsets can be registered to the base unit.

Generally a maximum of 3 extensions excluding or including the base unit can operate at a time. If 3 other extensions are in use, such as conducting a call, you may not be able to use your unit. “System is busy. Please try again later.” will be displayed when you try to operate your unit. The maximum operating number may decrease, depending on the state of usage, such as using the Clarity Booster feature (p. 31), or when the Answering System is taking a call.

Preparation

KX-TG2970

KX-TGA290

Up to 2 accessory handsets can be added.

1Base unit: Press [MUTE].

•The MUTE indicator flashes. After the MUTE indicator starts flashing, the rest of the procedure must be completed within 1 minute.

2Cordless handset:

(1)Press the soft key ( OK ).

(2)Wait until 3 beeps sound and the display shows the new extension number.

• Registration is complete.

Ex. Extension number 2

IN USE SP

[2]

Handset [2]

 

Registered

 

•The registered number “[1]” to “[3]” is shown on the top right of the display.

•You can stop registration by pressing [OFF] on the cordless handset and pressing [MUTE] on the base unit.

•To re-register a cordless handset to a different base unit of the same model, see pages 68 and 69.

For assistance, please call: 1-800-ADT-ASAP

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Charge the battery for 6 hours before initial use GHz Expandable Cordless Answering SystemModel No. KX-TG2970 Pulse-or-tone dialing capability Accessories included Attach your purchase receipt hereCopyright Trademarks Battery ChargeFor Best Performance Base Unit Location/NoiseContents Contents Base unit Location of ControlsConf Conference/FUNCTION Location of ControlsCordless handset Charger unitCordless handset soft keys How to use the navigator keys/soft keysLighted handset keypad Navigator keysDisplays Base unit Cordless handsetBacklit LCD displays Connections InstallationInstallation Installing the Battery in the Cordless HandsetTo replace the battery Recharge Installation Battery ChargeBattery strength Display prompt Battery strengthBattery information Battery replacementOperation Operating time Programming Guidelines Base Unit Handset Programmable SettingsHow to select a function item from the menu TelephoneProgrammable Settings ToneUseful information Remote code Call monitoring p Programmable Settings Function Menu TableTo the ADT security services Date and time Programmable Settings Date and Time Base UnitFor Caller ID service users p TelephoneSet dial mode Or , then press Select a or B by pressing or Set line modeThen press Scroll to Set line mode by pressing Or , then press Scroll to Set tel line by pressing orRinger setting Ringer volumeOff ? Press the soft key Save , then press OFF Programmable Settings Ringer Tone HandsetOr , then press Scroll to Ringer tone by pressing or Then press Select the desired tone by pressing orLow Programmable Settings Auto Talk HandsetTo review the greeting Preparing the Answering SystemGreeting Message Base Unit To record a greeting messagePre-recorded greeting 3minPreparing the Answering System Caller’s Recording Time Base UnitPreparing the Answering System Number of Rings Base Unit Select the number of rings by pressing orToll saver KX-TG2970 Registration for Additional Handsets Base Unit & HandsetTo have a hands-free phone conversation Using the Base Unit Base UnitTo adjust the handset/speaker volume during a conversation Making CallsTo redial the last number dialed 3334444Making Calls To dial after confirming the entered numberTo adjust the receiver/speaker volume while talking Making Calls Using the Cordless Handset HandsetClarity Booster feature To redial using the redial list Memory RedialAuto Talk Answering CallsDisplay Meaning Caller ID ServiceWhat √ means Using the Caller ListViewing the Caller List Base Unit Handset Press or to enter the Caller ListScroll to the desired caller by pressing or TURNER,CINDYBase unit Lift the handset or press Digital SP-PHONE Scroll to the desired caller by pressingPress the soft key To call the edited numberOr , then press Select Off or On by pressing or To turn on or off Caller ID Number Auto Edit featureCaller ID edit Or , then press Scroll to Caller ID edit by pressingPress again Base Unit HandsetTo erase a specific caller To erase all entries AgainOFF Storing Names and Numbers Base Unit Handset Phone BookTom 5557654321For example, to enter Tom Phone BookSelecting characters to enter names If you make a mistake while entering a name or numberIndex table Keys FrankPhone Book Dialing from the Phone Book Base Unit Handset To search for a name by initialJane 456-7890555 Complete Phone Book Copying Items in the Phone Book HandsetTo copy one phone book item to another unit Or , then press Select the destination extension number by To copy all of the items in your phone book to another unitCopy all items Or , then press Scroll to Copy all items by pressingPress LOCATOR/INTERCOM/TRANSFER IntercomCalling Base Making Intercom CallsDuring an intercom call IntercomAnswering Intercom Calls Press , or Hold IntercomFrom a cordless handset to another cordless handset Transferring a Call Base Unit HandsetFrom the base unit to the cordless handset From the cordless handset to the base unitTransferring a Call Quick call transferTo complete the transfer, press OFF During a call, press Hold Intercom Conference CallsCall Share To join a conversation Call Share Base Unit HandsetTemporary Tone Dialing Special FeaturesFor Call Waiting Service Users Base Unit Handset Muting Your Conversation Base Unit HandsetOr , then press Scroll to Incoming call by pressing Special FeaturesIncoming Call Tone Base Unit Handset Incoming callThen press Scroll to Set flash time by pressing Selecting the flash time use either Base Unit or HandsetSet flash time 700msSetting the Unit to Answer Calls Base Unit Automatic Answering OperationPress Answer on to turn on the Answering System Monitoring incoming calls To turn the Call Monitoring feature off on the base unitTo turn this feature on, select On in step Automatic Answering OperationListening to Messages To play back messagesPress Playback To turn the Answering System on Received callsTo end remote operation, press OFF Voice menuDuring playback Listening to MessagesErasing Messages Erasing a specific messageErasing all messages Press Hold Transfer Press 9 to hang up the callInterrupting remote operation Summary of remote operation Remote Operation from a Touch Tone PhoneTo check the remote code, repeat steps 1 to Or , then press Scroll to Remote code by pressing orEnter a 2-digit remote code Press Save Press StopAnswering Remote Operation from a Touch Tone Phone Voice MenuDirect commands Turning on the Answering SystemSkipping the greeting To attach the belt clip To remove the belt clip Connecting an optional headsetBelt Clip Optional HeadsetWall Template for the Charger unit Wall MountingPull down the handset hook until it locks, so Tab holds the handsetWall Mounting Canceling Registration/Re-registration Canceling the Handset Registration HandsetDeregistration Telephone Phone book full If the Following Appear on Your DisplayBusy InvalidLater If the Following Appear on Your DisplayRegistered SECURITYinactiveTroubleshooting Problem Cause & RemedyTelephone System SP-PHONE, or TroubleshootingTroubleshooting Answering System Charge for 6 HRS GeneralImportant Safety Instructions FCC and Other Information Important Safety InstructionsFCC and Other Information FCC RF Exposure Warning Caller ID Number auto edit IndexTransferring a call IndexEnergy Star SpecificationsPage Page Panasonic Limitation For product service When you ship the productFor your future reference
Top Page Image Contents