Useful Information
Problem
Noise is heard during a call on the headset.
I cannot connect my headset to the base unit.
Some headset enhanced features are not available.
An error tone is heard when I try to program the Bluetooth feature.
Cause/solution
R A Bluetooth headset can communicate with the base unit within a range of approximately 10 m. The connection may be subject to interference from obstructions such as walls or electronic devices. Move closer to the base unit.
R Confirm that your headset is turned on.
R If your headset is already connected to another Bluetooth device such as your cellular phone, disconnect the headset from your cellular phone, then perform the connecting procedure from the base unit.
R If someone is using a cellular line, you cannot connect the headset. There can be only one active Bluetooth connection at a time.
R The headset has not been registered to the base unit. Register the headset (page 45).
R The base unit does not support enhanced features such as Last number redial or Call reject.
R The Bluetooth feature cannot be accessed immediately after connecting the AC adaptor to the base unit. Wait a few seconds and try again.
R The headset has not connected to the base unit yet, even though you performed the connecting procedure setting. Wait a few seconds and try again.
67