Panasonic KX-TG7653AZ, KX-TG7652AZ Repeating tone is heard while talking using the handset

Page 70

Useful Information

Problem

A repeating tone is heard while talking using the handset.

or

The indicator continues to light amber and the indicator flashes green.

Cause/solution

R MPROGRAMN was pressed. The unit is in programming mode. To exit, press MPROGRAMN again. Do not press MPROGRAMN, except when deregistering the unit.

Bluetooth PIN

Problem

Cause/solution

I cannot remember the PIN.

 

R Change the PIN using the following method.

 

 

 

1

MMENUN#619

 

 

2

*7000

 

 

 

3

Enter the new 4-digit PIN. a MOKN

 

 

4

Enter the new 4-digit PIN again. a MSAVEN a

 

 

 

MOFFN

 

 

 

 

 

 

 

 

 

Liquid damage

 

 

 

Problem

Liquid or other form of moisture has entered the handset/base unit.

Caution:

Cause/solution

R Disconnect the AC adaptor and telephone line cord from the base unit. Remove the batteries from the handset and leave to dry for at least 3 days. After the handset/base unit are completely dry, reconnect the AC adaptor and telephone line cord. Insert the batteries and charge fully before use. If the unit does not work properly, contact an authorised service centre.

R To avoid permanent damage, do not use a microwave oven to speed up the drying process.

70

Image 70
Contents Before initial use, see Getting Started on Model shown is KX-TG7652Voice mail Service for Landline Caller ID ServiceUsing Bluetooth Devices IntroductionModel No Base unit Model compositionSeries Handset QuantityAccessory item/Part number Quantity KX-TG7652 KX-TG7653 Accessory informationSupplied accessories AC adaptor for base unit and chargerAdditional/replacement accessories Expanding your phone systemFor your safety Important safety instructions For best performance Power consumption Base unit Connections Setting upCorrect Wrong Confirm Charging is displayed Charge indicator Battery installationBattery charging During a power failureControls Intelligent eco modeBase unit Talk Display/IndicatorsHandset Moffn Mrecalln Mcall WaitnBase unit display item Meaning Cell 1/CELL 2 indicators on the base unitUse Greeting onlyDate and time Initial settingsHeadset indicator on the base unit ExampleTrademarks Link to cell featureRegistering a cellular phone HandsetSelecting which unit receives cellular calls Link to cell settingsRing as cell mode MoffnAuto connection to the cellular phone Cellular line only mode If you do not use the landlineConnecting/disconnecting the cellular phone manually To turn onCellular line selection Changing the Bluetooth PIN Personal Identification NumberDeregistering Bluetooth devices Storing your area code for local callLink to Cell Making landline calls Making cellular callsMcelln Answering calls Useful features during a call While another unit is on a cellular call Using the other line during a conversationPrivacy mode While another unit is on a landline callTo answer a 2nd call MbN Hold a Mselectn To make a 2nd callMbN Hold a Mselectn Adding entries Shared phonebookCell 1, Cell Finding and calling from a phonebook entry GroupsEditing entries Erasing entries Chain dialProgrammable settings Display the menu tree and direct command code tableCheck greeting Settings Ring count*1 RingsGreeting Pre-recorded*1Connect *1 BluetoothDevice *4 Ringer volume Add new Disconnect *1Adjustment *1, *10 Auto Manual SettingsAlarm Once Auto connect Min Cell areaHandset *3, *7 Ringer volume Main menu Initial settingRinger setting Ringer volume Night modeRepeater mode*1 Set tel line*3 Set recall 900 msPrivacy mode*1 Registration Register handsetNewzealand = 600 ms Condition is not goodSpecial programming AlarmNight mode OffMbN Caller barred a Changing the handset nameIncoming call barring Caller ID subscribers only MclearnRegistering a handset to the base unit Registering a unitOperating additional units Additional handsetsDeregistering a handset Call waiting and Caller ID compatible for Australia Using Caller ID serviceCaller ID features Private caller The callerMcall Waitn Talking Caller IDFor Caller ID Type II users Phonebook name announcementRinger ID Using a cellular lineCaller list Viewing the caller list and calling backStoring caller information to the phonebook Erasing selected caller informationErasing all caller information To erase your area codeCopying phonebook from a cellular phone phonebook transfer Operating a Bluetooth wireless headset using a landline Registering a headset to the base unitCall sharing between your headset and the handset Switching from the base unit to your headsetAdjusting your headset receiver volume Base unit While the handset is on a landline callMemory capacity including your greeting message Answering system for landlineTurning the answering system on/off Call screeningListening to messages using the base unit Greeting messageOperating the answering system Listening to messages using the handsetErasing all messages Calling back Caller ID subscribers onlyRemote commands Remote access codeUsing the answering system remotely Remote operationNumber of rings before the unit answers a call Answering system settingsTurning on the answering system remotely This will allow the voice mail to receive any messagesMessage alert MMENUN#305 MbN Select the desired setting. a Msaven a MoffnCaller’s recording time Selecting Greeting onlyStoring the voice mail VM access number Voice mail service for landlineListening to voice mail messages Voice mail Service for Landline Transferring calls, conference calls IntercomHandset locator Making an intercom callControls Installation for Dect repeaterFor best performance MprogramnInstallation Wall mountingWall mounting AC adaptor cord25 mm Screws Hooks ChargerWall mounting template 25 mmBusy Check tel line Error Failed Error messagesBase no power Cause/solutionGeneral use Problem Cause/solution TroubleshootingInvalid Cannot hear a dial tone Battery recharge Problem Cause/solution Programmable settings Problem Cause/solutionMaking/answering calls, intercom Problem Can make and answer cellular calls but cannot hear a sound Caller ID/Talking Caller ID Problem Cause/solution Using Bluetooth devices Problem Cause/solution Noise is heard during a call on the headset Answering system Problem Cause/solution Re-register Dect repeater ProblemDeregister MlocatornBluetooth PIN Problem Cause/solution Repeating tone is heard while talking using the handsetLiquid damage Problem Warranty for New Zealand Exchange ProgramIndex Index Page Page For your future reference PNQX5357ZA TT0212MG0Sales Department