Panasonic KX-TG7652AZ, KX-TG7653AZ Dect repeater Problem, Deregister, Re-register, Mlocatorn

Page 69

				Useful Information

DECT repeater

Problem		Cause/solution
The unit does not work.		R When the indicators do not light, the AC adaptor is
		not connected properly. Check the connections.
		R When the indicators do not light green, move the
		unit closer to the base unit.
		R The repeater mode is “Off”. Set the repeater
		mode to “On” (page 57).
		R Registration may have been cancelled. Deregister
		the unit, then re-register.
		Deregister:
		1 Unplug the AC adaptor, then press and hold
		MPROGRAMN.
		2 While pressing and holding MPROGRAMN,
		re-connect the AC adaptor.
		3 Keep holding to press MPROGRAMN for about
		10 seconds until the		indicator stops
		flashing and lights red. Then release
		MPROGRAMN.
		R The	and indicators light amber for a
		moment then only the indicator flashes
		red.	indicator flashes green after
		R If the	indicator flashes green after
		releasing MPROGRAMN, deregistration
		failed. Deregisterthe unit again.
		Re-register:
		1 DECT repeater: Unplug the AC adaptor.
		2 Base unit: Press and hold MLOCATORN for
		about 5 second, until the registration tone
		sounds.
		R The next step must be completed within 90
		seconds.
		3 DECT repeater: Connect the AC adaptor,
		then wait until the		indicator and indicator
		light green.

4Base unit: To stop the registration tone, press

MLOCATORN.

While talking using the	R The handset is out of range. Move the handset
handset, sound cuts in and	closer to this unit.
out.

69

Image 69

Contents Model shown is KX-TG7652 Before initial use, see Getting Started onUsing Bluetooth Devices Caller ID ServiceVoice mail Service for Landline IntroductionSeries Model compositionModel No Base unit Handset QuantitySupplied accessories Accessory informationAccessory item/Part number Quantity KX-TG7652 KX-TG7653 AC adaptor for base unit and chargerExpanding your phone system Additional/replacement accessoriesFor your safety Important safety instructions For best performance Power consumption Base unit Setting up ConnectionsCorrect Wrong Battery charging Battery installationConfirm Charging is displayed Charge indicator During a power failureIntelligent eco mode ControlsBase unit Handset Display/IndicatorsTalk Moffn Mrecalln Mcall WaitnUse Cell 1/CELL 2 indicators on the base unitBase unit display item Meaning Greeting onlyHeadset indicator on the base unit Initial settingsDate and time ExampleRegistering a cellular phone Link to cell featureTrademarks HandsetRing as cell mode Link to cell settingsSelecting which unit receives cellular calls MoffnConnecting/disconnecting the cellular phone manually Cellular line only mode If you do not use the landlineAuto connection to the cellular phone To turn onDeregistering Bluetooth devices Changing the Bluetooth PIN Personal Identification NumberCellular line selection Storing your area code for local callLink to Cell Making cellular calls Making landline callsMcelln Answering calls Useful features during a call Privacy mode Using the other line during a conversationWhile another unit is on a cellular call While another unit is on a landline callMbN Hold a Mselectn To make a 2nd call To answer a 2nd callMbN Hold a Mselectn Shared phonebook Adding entriesCell 1, Cell Groups Finding and calling from a phonebook entryEditing entries Chain dial Erasing entriesDisplay the menu tree and direct command code table Programmable settingsGreeting Settings Ring count*1 RingsCheck greeting Pre-recorded*1Device *4 Ringer volume BluetoothConnect *1 Add new Disconnect *1Alarm Once SettingsAdjustment *1, *10 Auto Manual Auto connect Min Cell areaRinger setting Ringer volume Main menu Initial settingHandset *3, *7 Ringer volume Night modePrivacy mode*1 Set tel line*3 Set recall 900 msRepeater mode*1 Registration Register handsetCondition is not good Newzealand = 600 msNight mode AlarmSpecial programming OffIncoming call barring Caller ID subscribers only Changing the handset nameMbN Caller barred a MclearnOperating additional units Registering a unitRegistering a handset to the base unit Additional handsetsDeregistering a handset Caller ID features Using Caller ID serviceCall waiting and Caller ID compatible for Australia Private caller The callerFor Caller ID Type II users Talking Caller IDMcall Waitn Phonebook name announcementCaller list Using a cellular lineRinger ID Viewing the caller list and calling backErasing all caller information Erasing selected caller informationStoring caller information to the phonebook To erase your area codeCopying phonebook from a cellular phone phonebook transfer Registering a headset to the base unit Operating a Bluetooth wireless headset using a landlineAdjusting your headset receiver volume Base unit Switching from the base unit to your headsetCall sharing between your headset and the handset While the handset is on a landline callTurning the answering system on/off Answering system for landlineMemory capacity including your greeting message Call screeningGreeting message Listening to messages using the base unitErasing all messages Listening to messages using the handsetOperating the answering system Calling back Caller ID subscribers onlyUsing the answering system remotely Remote access codeRemote commands Remote operationTurning on the answering system remotely Answering system settingsNumber of rings before the unit answers a call This will allow the voice mail to receive any messagesCaller’s recording time MMENUN#305 MbN Select the desired setting. a Msaven a MoffnMessage alert Selecting Greeting onlyVoice mail service for landline Storing the voice mail VM access numberListening to voice mail messages Voice mail Service for Landline Handset locator IntercomTransferring calls, conference calls Making an intercom callFor best performance Installation for Dect repeaterControls MprogramnWall mounting InstallationAC adaptor cord Wall mountingWall mounting template Charger25 mm Screws Hooks 25 mmBase no power Error messagesBusy Check tel line Error Failed Cause/solutionTroubleshooting General use Problem Cause/solutionInvalid Cannot hear a dial tone Programmable settings Problem Cause/solution Battery recharge Problem Cause/solutionMaking/answering calls, intercom Problem Can make and answer cellular calls but cannot hear a sound Caller ID/Talking Caller ID Problem Cause/solution Using Bluetooth devices Problem Cause/solution Noise is heard during a call on the headset Answering system Problem Cause/solution Deregister Dect repeater ProblemRe-register MlocatornRepeating tone is heard while talking using the handset Bluetooth PIN Problem Cause/solutionLiquid damage Problem Exchange Program Warranty for New ZealandIndex Index Page Page PNQX5357ZA TT0212MG0 For your future referenceSales Department