{C}
{OFF}
{V}, {^}
{REDIAL}
L If the other party has difficulty hearing you, press {V} to decrease the speaker volume.
L While on a call, you can switch from the receiver to the speakerphone by pressing {s}. To switch back to the receiver, press {C}.
To dial after confirming the entered number (Pre-dial)
1 Enter the phone number.
L The handset announces each button you press, including {1} to {0}, {*} (“Star”), {#} (“Pound”), {FLASH/ CALL WAIT} (“Flash”) and {Pause}.
L The announcement is heard at the speaker volume. To increase or decrease volume, press {^} or {V}.
L If you misdial, press {Clear}. Enter the correct number.
L If a pause is required when dialing, press {Pause} where needed (page 17).
L To cancel, press {OFF}.
2 Press {C} or {s}.
3 When finished talking, press {OFF} or place the handset on the base unit or charger.
Note:
L If the Handset Talking Keypad is turned off (page 44), the handset will not announce the buttons you press.
The handset will not make announcements, when:
•the Handset Talking Keypad is turned off
•the Answering System is in use
•the handset has lost communication with the base unit
•the base unit is announcing
•the base unit is making an outside call.
For assistance, please visit http://www.panasonic.com/consumersupport