Locator/Intercom
Locator/Intercom
Intercom calls can be made between the handset and the base unit.
Making intercom calls
Using the handset
1 Press {HOLD/INTERCOM}.
Calling Base
L The base unit will ring for 1 minute. L To stop paging, press {OFF}.
2 When the paged party answers, start talking.
Intercom 00-00-05
L You can switch to the speaker by pressing {s}. To switch back to the receiver, press {C}.
3 To disconnect the intercom, press {OFF}.
Using the base unit
1 Press {LOCATOR/INTERCOM}.
L The
L The handset will ring for 5 minutes.
L To stop paging, press
2 When the paged party answers, talk into the MIC.
3 To disconnect the intercom, press {SP- PHONE} or {LOCATOR/INTERCOM}.
L The indicator light goes out.
During an intercom call:
L If you have difficulty hearing while using the handset speakerphone and base unit speaker, decrease the speaker volume by pressing VOLUME {<} on the base unit or {V} on the handset.
L If an incoming call is being received, you will hear two tones (incoming call tone, page 40) and “BC” will flash rapidly on the base unit.
To answer the call;
—if using the handset, press {OFF}, then {C} or {s}.
—if using the base unit, press {SP- PHONE} twice.
Answering intercom calls
Using the handset
When a handset is paged, it rings and the Ringer/Message Alert indicator flashes rapidly.
1 Press {C}, {s} or {HOLD/ INTERCOM}.
Call from Base
L You can also answer a call by pressing any button except {V}, {^} or {OFF}.
2 To disconnect the intercom, press {OFF}.
Using the base unit
When the base unit is being paged, it rings.
1 Press
2 To disconnect the intercom, press {SP- PHONE} or {LOCATOR/INTERCOM}.
32For assistance, please visit http://www.panasonic.com/consumersupport