Answering System Features
If “New message” is displayed on the handset, new messages have been recorded.
L If the Message Alert is turned on (page 55), the Ringer/Message Alert indicator on the handset will flash slowly when new messages have been recorded and the handset is not in use.
1 Press {MENU}.
2 Press {Select} at “Message play”.
L The unit announces the number of new messages and only new messages are played back from the speaker. To switch to the receiver, press {C}. To switch back to the speaker, press {s}.
L When you have no new messages, the unit announces “No new messages. All message playback” and plays back all messages.
L When you have no messages, the unit announces “No messages”.
L If you do not press any button, the voice guidance will start.
3 Press {OFF} when finished.
Note:
L If a call is received during playback, the unit rings and playback stops. To answer the call, press {C} or {s}. For playback, start again from the beginning after hanging up.
L At the end of the last message, “End of final message” is heard. The unit will announce the remaining recording time if it is less than 3 minutes.
L If you hear “Memory full” after playback, erase unnecessary messages
(page 49).
L When memo messages are played (p. 51), “MEMO” is displayed.
To slow down the playback speed (Slow Talk Message Playback)
Press {3} during playback.
L To return to normal speed, press {3} on the handset.
L Each time you press the button during playback, the speed will change to slow/ normal.
L Playback speed will return to normal after you finish listening to messages.
Repeating a message
Press {Repeat} while listening to the message.
L If pushed within the first 5 seconds of a message, the previous message will be played.
Skipping a message
Press {Skip} to play the next message.
Voice guidance
If you do not press any buttons after the last message is played back, the unit’s voice guidance starts. Operate the answering system by following the guidance as necessary.
The unit will announce “Press 4 to play back new messages. Press 5 to play back all messages.”
L You can press buttons for other playback options (page 51) even if the voice guidance has started.
L If you do not press any button within 10 seconds after the voice guidance, the handset returns to standby mode.
50For assistance, please visit http://www.panasonic.com/consumersupport