Panasonic K10059 manual Bypassing Protection Zones, Bypassing zones, Gbypassnormal

SecurityPhone.book 14 ページ ２００４年７月２１日 水曜日 午後６時５８分

Bypassing Protection Zones

Using this mode, you can set the selected zones to be unprotected. After setting this mode, set the security mode as desired.

While the security system is armed, you can not set the Bypass. To bypass zones, disarm the security system (p. 12).

•WHEN CERTAIN ZONES ARE BYPASSED, THE SYSTEM DOES NOT PROTECT THE BYPASSED ZONE, THE ALARM DOES NOT SOUND, AND AN ALARM SIGNAL IS NOT SENT TO THE CUSTOMER MONITORING CENTER.

•You can not set fire zones to be bypassed.

•When the system is disarmed, bypassed zones automatically is unbypassed.

Make sure all perimeter doors and windows are closed and READY is displayed.

Bypassing zones

You can select the protection zones.

Refer to “Using the BYPASS key” on page 20 in the 3000EN Security Systems User’s Guide.

Base Unit

1Press [ADT].

2	Scroll to “BYPASS” by pressing [d] or [B], then
				gBYPASS
	press [g].
3	Press [g] at “BYPASS(NORMAL)”.
				gBYPASS(NORMAL)
4	Enter your security code.
				ENTER CODE
						----
5	Enter the desired zone number of 2 digits.
				ENTER ZONES
	(Ex. To set zone 1 unprotected, enter “01”.)			--,--,--,--,
	• You can enter four zone numbers at one time. To			Example
	enter over four zone numbers, repeat from the			ENTER ZONES
	step 3 after pressing [	g	] (ENTER).	--,--,--,01,
					READY	=ENTER

14