Panasonic K10059 manual Security Codes & Authority Levels RF User Number, GRF User Number

SecurityPhone.book 32 ページ ２００４年７月２１日 水曜日 午後６時５８分

Security Codes & Authority Levels

RF User Number

If you enroll a wireless button device (keyfob) in system, you need to set the zone number for the device.

Refer to “RF User Number” on page 31 in the 3000EN Security Systems User’s Guide.

While the security system is armed, you can not turn on this function. To turn on, disarm the security system (p. 12).

Make sure all perimeter doors and windows are closed and READY is displayed.

Base Unit

1Press [ADT].

2	Scroll to “OTHER FUNCTIONS” by pressing [d]
				gOTHER FUNCTIONS
	or [B], then press [g].
3	Scroll to “USER CODES” by pressing [d] or [B],
				gUSER CODES
	then press [g].
4	Scroll to “RF USER NUMBER” by pressing [d]
				gRF USER NUMBER
	or [B], then press [g].
5	Enter your security code.
				ENTER CODE			----
6	Enter the user number of 2 digits, then press
				Enter User #			-,-
	[g] (	ENTER	).
	(Ex. To select user number 8, enter “08”.)			Example
				Enter User #			0,8
						=ENTER
					READY
						g

7Enter the zone number of 2 digits.

(Ex. To select zone number 8, enter “08”.)

Enter Zone #

--

Example

Enter Zone #

08 READY g=ENTER

8Press [g] (ENTER).

•If a confirmation tone (one beep) is not heard, you entered the wrong security code in step 5 or wrong user number in step 6. The setting is not saved.

Try again from step 4.

9Press [STOP] to go to the standby mode.

32