Panasonic K10059 Arming the System Setting the Instant mode, Scroll to Instant by pressing d or B

Page 11

SecurityPhone.book 11 ページ 2004年7月21日 水曜日 午後6時58分

Arming the System

Setting the Instant mode

When you stay at home and no one intends to use an entry/exit door, select this mode.

When you set the Instant mode,

the system is armed same as the Stay mode, and

if the protected perimeter windows and doors are opened, an alarm sounds immediately.

Base Unit

1Press [ADT].

2

Press [g] at “ARM”.

 

 

 

 

gARM

 

 

 

 

 

 

 

 

 

 

3

Scroll to “INSTANT” by pressing [d] or [B],

 

 

 

 

gINSTANT

 

 

then press [g].

 

 

 

• The armed INSTANT message is displayed.

 

Example

 

 

 

ARMED ;INSTANT;

 

 

 

 

You may exit now

 

 

 

 

 

 

4Press [STOP] to go to the standby mode.

Handset : Press the soft key ( ADT ), and follow steps 2 and 3 above, using the cordless handset. Press [OFF] to go to the standby mode.

• To exit the menu, press [STOP] or [OFF].

To confirm the security mode you set, press [ADT] in the standby mode.

IMPORTANT:

Arming the system in this mode greatly increases the chance of false alarms. Use extreme care in selecting this mode of arming.

11

Image 11
Contents K10059 6/04 Rev. a SecurityLink PlusTMOverview Contents Base Unit Location of ControlsIcon Meaning Security System DisplaysExit Alarms Entry/Exit DelaysEntry Delay Exit DelayArming the System Scroll to Away by pressing d or B Arming the System Setting the Away modePress ADT Press g at ARM Press g at Stay Arming the System Setting the Stay modeThen press g Enter your security code Arming the System Setting the Night-Stay modeScroll to Night-Stay by pressing d or Then press g Arming the System Setting the Instant modeScroll to Instant by pressing d or B Disarming the security system When the unit is in the standby modePress Stop to go to the standby mode When slow or fast beeps sound while the system is armedDisarming the security system When alarm sounds while the system is armedGBYPASSNORMAL Bypassing Protection ZonesBypassing zones Press g Enter Bypassing Protection ZonesPress g Scroll to Quick Bypass by pressing d or Bypassing Protection Zones Quick BypassPress ADT Scroll to Chime ON/OFF by pressing d or Chime ModeOr B, then press g Scroll to DATE/TIME by pressing d or B Setting the Date and TimeGOTHER Functions Press ADT Scroll to Other Functions by pressing dTo view the current date and time Setting the Date and TimeEnter the security code Or Press Using the Panic KeysPanic Keys Press and hold the required Panic keys for two secondsEnter the security code Panic KeysSummary of remote operation Remote Phone ControlOr B Selecting the Function MacroOr B , then press g Press g at Functions A-D Scroll to the desired function key by pressingGACTIVATE Device Device CommandsGDEVICE Commands GUSER Codes Security Codes & Authority LevelsAdding User Code Security Codes & Authority Levels Enter the user number of 2 digits Security Codes & Authority Levels Deleting User CodeOr B , then press g Scroll to User Codes by pressing d or B Then press g Scroll to DEL. User Code by pressing dEx. To select user number 8, enter GAUTHORITY LevelThen press g Scroll to Authority Level by pressing d Enter the user number of 2 digits, then pressSecurityPhone.book 29 ページ 2004年7月21日 水曜日 午後6時58分 Then press g Scroll to Access Group by pressing d or Security Codes & Authority Levels Access GroupSecurityPhone.book 31 ページ 2004年7月21日 水曜日 午後6時58分 Or B, then press g Enter your security code Security Codes & Authority Levels RF User NumberGRF User Number Then press g Scroll to RF User Number by pressing dSecurityPhone.book 33 ページ 2004年7月21日 水曜日 午後6時58分 Select Off or On by pressing d or B Security Codes & Authority Levels PagerThen press g Scroll to Pager ON/OFF by pressing d or Or B, then press g Scroll to Schedules by pressing d or B SchedulesSchedules GSCHEDULESEnter Event Forced Away Partition Event No Display Description Event TableOr B , then press g Enter your security code Viewing the Event LogGVIEW Event LOG Or B , then press g Scroll to View Event LOG by pressing dIs displayed, then enter your Testing the SystemPress ADT Scroll to Test by pressing d or B, then Press g Enter your security codePress ADT Scroll to Status Request by pressing d Checking the Current StatusDisplay Status GSTATUS RequestPress ADT Scroll to Voice Status by pressing d or Checking the Current Status Voice StatusPress ADT Enter your security code Direct CommandsEnter the number of the desired commands Scroll to Mute Security by pressing d or Mute SecurityMute Security Press FUNCTION/EDITVOX Mode in Two Way Voice Two Way Voice FeatureListening Mode in Two Way Voice Talk Mode in Two Way VoiceMain menu Sub-menu Function Menu TableFunction Menu Table Display message Cause & Remedy If the Following Appear on Your DisplayIndustry Canada TroubleshootingRegulatory Statements and Warnings Federal Communications Commission FCC PartRinger Equivalence Number Notice FCC PartIndustrie Canada Limitations of this System Panasonic Product Limited Warranty Warranty Exclusions and Limitation SecurityPhone.book 54 ページ 2004年7月21日 水曜日 午後6時58分 Obtaining Service PQQX00000ZA F0804-0 D ADT Security Services, Inc K10059 6/04 Rev. a