Panasonic K10059 manual Setting the Date and Time, GOTHER Functions, Press

SecurityPhone.book 18 ページ ２００４年７月２１日 水曜日 午後６時５８分

Setting the Date and Time

You can set the date and time of the security system by following the operation below. The date and time setting for the telephone should be programmed through the “Telephone” menu.

While the security system is armed, you can not set the Date and Time. To set, disarm the security system (p. 12).

Base Unit

1Press [ADT].

2	Scroll to “OTHER FUNCTIONS” by pressing [d]
		gOTHER FUNCTIONS
	or [B], then press [g].
3	Scroll to “DATE/TIME” by pressing [d] or [B],
		gDATE/TIME
	then press [g].
4	Enter your security code.
		ENTER CODE
	• The current date and time are displayed.	----

• If you entered the wrong security code, the phone will go back to the previous display. Try again from step 2.

5Press [*].

•To exit the menu, press [0] to [9] or [#], or wait for 30 seconds. Then press [OFF]

Time/Date SAT 12:00AM 01/01/00

61 Enter 4 digits for the time (hour and minute). (Ex. To set 9:30, enter “0930”.)

2 When the cursor is on “A” or “P”, press [1] for PM or [0] for AM.

3Enter 2 digits each for the year, month, and day. (Ex. To set May 15, 2004, enter “04 05 15”.)

•Military time can not be used.

•To move the cursor to the right, press [*]. To move the cursor to the left, press [#].

•If you entered the wrong number, the cursor do not move to the next item.

•To cancel the setting, press [#] at the first digit or wait for 30 seconds.

Example

Time/Date SAT 09:30A2004/05/15

7To save the new setting, press [*] at the last digit.

8Press [STOP] to go to the standby mode.

Handset : Press the soft key ( ADT ), and follow steps 2 to 7 above, using the cordless handset. Press [OFF] to go to the standby mode.

18