Panasonic K10059 Security Codes & Authority Levels Pager, Select Off or On by pressing d or B

SecurityPhone.book 34 ページ ２００４年７月２１日 水曜日 午後６時５８分

Security Codes & Authority Levels

Pager

If the Pager setting is turned on, the phone can automatically send a message to a pager, when the system is armed or disarmed by the programmed user code. The factory preset is ON.

Refer to “Pager On/Off” on page 31 in the 3000EN Security Systems User’s Guide.

Make sure all perimeter doors and windows are closed and READY is displayed.

While the security system is armed, you can not turn on this function. To turn on, disarm the security system (p. 12).

Base Unit

1Press [ADT].

2	Scroll to “OTHER FUNCTIONS” by pressing [d]
				gOTHER FUNCTIONS
	or [B], then press [g].
3	Scroll to “USER CODES” by pressing [d] or [B],
				gUSER CODES
	then press [g].
4	Scroll to “PAGER ON/OFF” by pressing [d] or
				gPAGER ON/OFF
	[B], then press [g].
5	Enter your security code.
				ENTER CODE			----
6	Enter the user number of 2 digits, then press
				Enter User #			-,-
	[g] (	ENTER	).
	(Ex. To select user number 8, enter “08”.)			Example
				Enter User #			0,8
						=ENTER
					READY
						g

7Select “Off” or “On” by pressing [d] or [B].

Pager On/Off

:On

READY g=ENTER

8Press [g] (ENTER).

•If a confirmation tone (one beep) is not heard, you entered the wrong security code in step 5 or wrong user number in step 6. The setting is not saved.

Try again from step 4.

9Press [STOP] to go to the standby mode.

34