Panasonic K10059 manual Viewing the Event Log, GVIEW Event LOG

SecurityPhone.book 38 ページ ２００４年７月２１日 水曜日 午後６時５８分

Viewing the Event Log

The phone can record up to 100 events in a log. Event log is sorted by the most recent to the oldest. When the 101st event is recorded, the oldest one is deleted.

Refer to “Event Logging Procedures” on pages 37 to 38 in the 3000EN Security

Systems User’s Guide.

Base Unit

1Press [ADT].

2	Scroll to “OTHER FUNCTIONS” by pressing [d]
		gOTHER FUNCTIONS
	or [B], then press [g].
3	Scroll to “VIEW EVENT LOG” by pressing [d]
		gVIEW EVENT LOG
	or [B], then press [g].
4	Enter your security code.
		ENTER CODE
	• To display the previous event, press [*].	----
	To display the following event, press [#].	Example
	• If you press [#] at the latest event, the phone will	005 E403 U000 P1
	go back to the step 2.	12:35AM 05/15/04
	• The number after “E” is the event log code.
	(Example, “403” means “Schedule Arm/Disarm
	AWAY”.) For further information, see “Table of
	Event Log Codes” on page 38 in the 3000EN
	Security Systems User’s Guide.
	• If you entered the wrong security code, the phone
	will go back to step 2. Try again from step 2.
	• To exit the menu, wait for 30 seconds.
5	Press [STOP] to go to the standby mode.

Handset : Press the soft key ( ADT ), and follow steps 2 to 4 above, using the cordless handset. Press [OFF] to go to the standby mode.

•When finished, press [0] to [9], or wait for 30 seconds. Then press [OFF] or [STOP] to exit the menu.

38