Panasonic K10059 manual Bypassing Protection Zones Quick Bypass

Page 16

SecurityPhone.book 16 ページ ２００４年７月２１日 水曜日 午後６時５８分

Bypassing Protection Zones

Quick Bypass

If the Quick Bypass is programmed by the security system installer, you can set all faulted (open) zones unprotected at once. Confirm with your installer if the Quick Bypass is active for your system.

When Quick Bypass is used, all faulted (open) zones are unprotected, the alarm does not sound, and an alarm signal is not sent to the Customer Monitoring Center. Refer to “Quick Bypass” on page 21 in the 3000EN Security Systems User’s Guide.

Make sure all perimeter doors and windows are closed and READY is displayed.

Base Unit

1Press [ADT].

2

Scroll to “BYPASS” by pressing [d] or [B], then

 

 

gBYPASS

 

 

press [g].

 

 

 

 

 

3

Scroll to “QUICK BYPASS” by pressing [d] or

 

 

gQUICK BYPASS

 

 

[B], then press [g].

 

 

 

 

 

4

Enter your security code.

 

 

ENTER CODE

 

 

• If you entered the wrong security code, the phone

----

 

will go back to the previous display. Try again from step 3.

• In a few seconds, all faulted (open) zones are displayed and automatically bypassed.

• The “Bypass” message is displayed momentarily.

5Press [STOP] to go to the standby mode.

Handset : Press the soft key ( ADT ), and follow steps 2 to 4 above, using the cordless handset. Press [OFF] to go to the standby mode.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents SecurityLink PlusTM K10059 6/04 Rev. aOverview Contents Location of Controls Base UnitSecurity System Displays Icon MeaningEntry/Exit Delays Entry DelayExit Delay Exit AlarmsArming the System Press ADT Press g at ARM Arming the System Setting the Away modeScroll to Away by pressing d or B Arming the System Setting the Stay mode Press g at StayScroll to Night-Stay by pressing d or Arming the System Setting the Night-Stay modeThen press g Enter your security code Scroll to Instant by pressing d or B Arming the System Setting the Instant modeThen press g When the unit is in the standby mode Press Stop to go to the standby modeWhen slow or fast beeps sound while the system is armed Disarming the security systemWhen alarm sounds while the system is armed Disarming the security systemBypassing zones Bypassing Protection ZonesGBYPASSNORMAL Bypassing Protection Zones Press g EnterBypassing Protection Zones Quick Bypass Press g Scroll to Quick Bypass by pressing d orChime Mode Press ADT Scroll to Chime ON/OFF by pressing d orSetting the Date and Time GOTHER FunctionsPress ADT Scroll to Other Functions by pressing d Or B, then press g Scroll to DATE/TIME by pressing d or BSetting the Date and Time To view the current date and timeUsing the Panic Keys Panic KeysPress and hold the required Panic keys for two seconds Enter the security code Or PressPanic Keys Enter the security codeRemote Phone Control Summary of remote operationSelecting the Function Macro Or B , then press g Press g at Functions A-DScroll to the desired function key by pressing Or BGDEVICE Commands Device CommandsGACTIVATE Device Adding User Code Security Codes & Authority LevelsGUSER Codes Security Codes & Authority Levels Security Codes & Authority Levels Deleting User Code Or B , then press g Scroll to User Codes by pressing d or BThen press g Scroll to DEL. User Code by pressing d Enter the user number of 2 digitsGAUTHORITY Level Then press g Scroll to Authority Level by pressing dEnter the user number of 2 digits, then press Ex. To select user number 8, enterSecurityPhone.book 29 ページ ２００４年７月２１日 水曜日 午後６時５８分 Security Codes & Authority Levels Access Group Then press g Scroll to Access Group by pressing d orSecurityPhone.book 31 ページ ２００４年７月２１日 水曜日 午後６時５８分 Security Codes & Authority Levels RF User Number GRF User NumberThen press g Scroll to RF User Number by pressing d Or B, then press g Enter your security codeSecurityPhone.book 33 ページ ２００４年７月２１日 水曜日 午後６時５８分 Then press g Scroll to Pager ON/OFF by pressing d or Security Codes & Authority Levels PagerSelect Off or On by pressing d or B Schedules SchedulesGSCHEDULES Or B, then press g Scroll to Schedules by pressing d or BEnter Event Forced Away Partition Event Table Event No Display DescriptionViewing the Event Log GVIEW Event LOGOr B , then press g Scroll to View Event LOG by pressing d Or B , then press g Enter your security codeTesting the System Press ADT Scroll to Test by pressing d or B, thenPress g Enter your security code Is displayed, then enter yourChecking the Current Status Display StatusGSTATUS Request Press ADT Scroll to Status Request by pressing dChecking the Current Status Voice Status Press ADT Scroll to Voice Status by pressing d orEnter the number of the desired commands Direct CommandsPress ADT Enter your security code Mute Security Mute SecurityPress FUNCTION/EDIT Scroll to Mute Security by pressing d orTwo Way Voice Feature Listening Mode in Two Way VoiceTalk Mode in Two Way Voice VOX Mode in Two Way VoiceFunction Menu Table Main menu Sub-menuFunction Menu Table If the Following Appear on Your Display Display message Cause & RemedyTroubleshooting Regulatory Statements and WarningsFederal Communications Commission FCC Part Industry CanadaFCC Part Ringer Equivalence Number NoticeIndustrie Canada Limitations of this System Panasonic Product Limited Warranty Warranty Exclusions and Limitation SecurityPhone.book 54 ページ ２００４年７月２１日 水曜日 午後６時５８分 Obtaining Service ADT Security Services, Inc K10059 6/04 Rev. a PQQX00000ZA F0804-0 D
Top Page Image Contents