Panasonic K10059 manual Overview

SecurityPhone.book 2 ページ ２００４年７月２１日 水曜日 午後６時５８分

This phone can be connected to an ADT Security System and used as an additional keypad interface. You can program/control system functions using the buttons on the telephone front panel.

The security system will provide the telephone line and power supply, and has priority over the telephone functions.

Overview

NCommunication with the Security System

The phone functions as a user interface (keypad/display) for the security system.

NArming and Disarming the Security System

You can arm/disarm the security system or set other system functions by using the function menu on the display.

NAlarms

When an alarm condition occurs, the base unit and cordless handset can sound an audible alarm with the status being displayed and announced, then the alarm report can be sent to the Customer Monitoring Center, if programmed so the alarm system is monitored, and upon receipt of an alarm signal by the Customer Monitoring Center.

NTwo Way Voice (SecurityLink® PlusTM)

In case of emergency, an operator in a Customer Monitoring Center can monitor/ announce/talk using the speakerphone on base unit and cordless handset, if programmed.

NRemote Phone Control

You can remotely control the security system by entering function commands from a touch tone phone located off the premises.

• ADT Monitoring Service must be in effect!

2