Panasonic K10059 manual Panasonic Product Limited Warranty

Page 52

SecurityPhone.book 52 ページ 2004年7月21日 水曜日 午後6時58分

Mechanical tampering, masking, painting or spraying of any material on the mirrors, windows or any part of the optical system can reduce their detection ability. Passive Infrared Detectors sense changes in temperature; however, as the ambient temperature of protected area approaches the temperature range of 90° to 105°F, the detection performance can decrease.

Alarm warning devices such as sirens, bells or horns may not alert people or wake up sleepers if they are located on the other side of closed or partly open doors. If warning devices sound on a different level of the residence from the bedrooms, then they are less likely to waken or alert people inside the bedrooms. Even persons who are awake may not hear the warning if the alarm is muffled from a stereo, radio, air conditioner or other appliance, or by passing traffic. Finally, alarm warning devices, however loud, may not warn hearing- impaired people or waken deep sleepers.

Telephone lines needed to transmit alarm signals from a premises to a central monitoring station may be out of service or temporarily out of service. Telephone lines are also subject to compromise by sophisticated intruders.

Even if the system responds to the emergency as intended, however, occupants may have insufficient time to protect themselves from the emergency situation. In the case of a monitored alarm system, authorities may not respond appropriately.

This equipment, like other electrical devices, is subject to component failure. Even though this equipment is designed to last as long as 10 years, the electronic components could fail at any time.

The most common cause of an alarm system not functioning when an intrusion or fire occurs is inadequate maintenance. This alarm system should be tested weekly to make sure all sensors and transmitters are working properly. Installing an alarm system may make one eligible for lower insurance rates, but an alarm system is not a substitute for insurance. Homeowners, property owners and renters should continue to act prudently in protecting themselves and continue to insure their lives and property.

We continue to develop new and improved protection devices. Users of alarm systems owe it to themselves and their loved ones to learn about these developments.

PANASONIC PRODUCT LIMITED WARRANTY

Panasonic, its parents, affiliates, and subsidiaries (the “Parties”) warrant, to the original retail purchaser only (the “Purchaser”), that this item (the “Product”) is free from manufacturing defects in material and workmanship, provided the Product is used in normal conditions and is installed and used in strict accordance with the instructions contained in the Product’s Owner’s Manual.

This limited warranty shall be for the following warranty period (the “Warranty Period”), commencing on the date the Purchaser buys the Product at retail in an unused condition.

Parts and Labor: 1 year (Warranted parts do not include Bulbs, LED’s and Batteries)

52

Image 52
Contents SecurityLink PlusTM K10059 6/04 Rev. aOverview Contents Location of Controls Base UnitSecurity System Displays Icon MeaningEntry/Exit Delays Entry DelayExit Delay Exit AlarmsArming the System Press ADT Press g at ARM Arming the System Setting the Away modeScroll to Away by pressing d or B Arming the System Setting the Stay mode Press g at StayScroll to Night-Stay by pressing d or Arming the System Setting the Night-Stay modeThen press g Enter your security code Scroll to Instant by pressing d or B Arming the System Setting the Instant modeThen press g When the unit is in the standby mode Press Stop to go to the standby modeWhen slow or fast beeps sound while the system is armed Disarming the security systemWhen alarm sounds while the system is armed Disarming the security systemBypassing zones Bypassing Protection ZonesGBYPASSNORMAL Bypassing Protection Zones Press g EnterBypassing Protection Zones Quick Bypass Press g Scroll to Quick Bypass by pressing d orChime Mode Press ADT Scroll to Chime ON/OFF by pressing d orSetting the Date and Time GOTHER FunctionsPress ADT Scroll to Other Functions by pressing d Or B, then press g Scroll to DATE/TIME by pressing d or BSetting the Date and Time To view the current date and timeUsing the Panic Keys Panic KeysPress and hold the required Panic keys for two seconds Enter the security code Or PressPanic Keys Enter the security codeRemote Phone Control Summary of remote operationSelecting the Function Macro Or B , then press g Press g at Functions A-DScroll to the desired function key by pressing Or BGDEVICE Commands Device CommandsGACTIVATE Device Adding User Code Security Codes & Authority LevelsGUSER Codes Security Codes & Authority Levels Security Codes & Authority Levels Deleting User Code Or B , then press g Scroll to User Codes by pressing d or BThen press g Scroll to DEL. User Code by pressing d Enter the user number of 2 digitsGAUTHORITY Level Then press g Scroll to Authority Level by pressing dEnter the user number of 2 digits, then press Ex. To select user number 8, enterSecurityPhone.book 29 ページ 2004年7月21日 水曜日 午後6時58分 Security Codes & Authority Levels Access Group Then press g Scroll to Access Group by pressing d orSecurityPhone.book 31 ページ 2004年7月21日 水曜日 午後6時58分 Security Codes & Authority Levels RF User Number GRF User NumberThen press g Scroll to RF User Number by pressing d Or B, then press g Enter your security codeSecurityPhone.book 33 ページ 2004年7月21日 水曜日 午後6時58分 Then press g Scroll to Pager ON/OFF by pressing d or Security Codes & Authority Levels PagerSelect Off or On by pressing d or B Schedules SchedulesGSCHEDULES Or B, then press g Scroll to Schedules by pressing d or BEnter Event Forced Away Partition Event Table Event No Display DescriptionViewing the Event Log GVIEW Event LOGOr B , then press g Scroll to View Event LOG by pressing d Or B , then press g Enter your security codeTesting the System Press ADT Scroll to Test by pressing d or B, thenPress g Enter your security code Is displayed, then enter yourChecking the Current Status Display StatusGSTATUS Request Press ADT Scroll to Status Request by pressing dChecking the Current Status Voice Status Press ADT Scroll to Voice Status by pressing d orEnter the number of the desired commands Direct CommandsPress ADT Enter your security code Mute Security Mute SecurityPress FUNCTION/EDIT Scroll to Mute Security by pressing d orTwo Way Voice Feature Listening Mode in Two Way VoiceTalk Mode in Two Way Voice VOX Mode in Two Way VoiceFunction Menu Table Main menu Sub-menuFunction Menu Table If the Following Appear on Your Display Display message Cause & RemedyTroubleshooting Regulatory Statements and WarningsFederal Communications Commission FCC Part Industry CanadaFCC Part Ringer Equivalence Number NoticeIndustrie Canada Limitations of this System Panasonic Product Limited Warranty Warranty Exclusions and Limitation SecurityPhone.book 54 ページ 2004年7月21日 水曜日 午後6時58分 Obtaining Service ADT Security Services, Inc K10059 6/04 Rev. a PQQX00000ZA F0804-0 D