Panasonic BB-GT1502C, BB-GT1540C, BB-GT1500C Amber Base unit’s IP address may conflict with the IP

			Preparation
Status			Meaning
Colour	Light pattern
Amber	On		L The base unit’s IP address may conflict with the IP
			addresses of other devices on your local network.
			Check the base unit’s static IP address using the
			handset: {MENU} i{#}{5}{0}{1}, then check
			the IP addresses of the other devices on your local
			network. If necessary, change the base unit’s
			static IP address (page 29).
	Flashing		L The base unit is obtaining an IP address or is
			obtaining configurations from the Aservice.
			Please wait.
			L The base unit is registering with the Aservice.
			Please wait.
			L If the STATUS indicator continues flashing, check
			the following:
			– Check the base unit’s IP address using the
			handset: {MENU} i{#}{5}{0}{1}
			If necessary, change the base unit’s static IP
			address (page 29).
			– If an IP address was not acquired, check your
			network devices’ (router, modem, etc.)
			connections. If the connections are made
			properly but the problem persists, check your
			network devices’ (router, modem, etc.) settings.
			– Many installation issues can be resolved by
			resetting all the equipment. First, shut down
			your modem, router, base unit, and computer.
			Then turn the devices back on one at a time in
			this order: modem, router, base unit, computer.
			– If you cannot access Internet Web pages using
			your computer, check to see if your Internet
			service provider is having connection issues in
			your area.
			– For more troubleshooting help, visit
			www.joip.com or contact the Aservice
			provider.
	Flashing		L Unplug the base unit’s AC adaptor to reset the
	rapidly		unit, then reconnect the AC adaptor. If the
			STATUS indicator is still flashing rapidly, there
			may be a problem with the base unit hardware.
			Contact Panasonic service personnel.
	For product assistance, visit www.globarange.com			23
		For Aassistance, visit www.joip.com