Panasonic BB-GT1500C Error messages, Display message Cause/solution, Busy, Free calls! Plug

Useful Information

Error messages

If the unit detects a problem, one of the following messages is shown on the handset display.

Display message	Cause/solution
Busy	L The called handset or base unit is in use.
	L Privacy mode is on for the call you tried to join
	(page 34).
	L Other units are in use and the system is busy.
	Try again later.
	L The line is in use. Wait until ior S
	disappears from the handset display.
Free calls! Plug	L Confirm the Ethernet cable is properly
internet cable.	connected (page 17).
www.joip.com	L Check the base unit’s IP address using the
	handset: {MENU} i{#}{5}{0}{1}
	If necessary, change the base unit’s static IP
	address (page 29).
	L Check your network devices’ (router, modem,
	etc.) connections. If the connections are made
	properly but the problem persists, check your
	network devices’ (router, modem, etc.)
	settings.
	L If you cannot access Internet Web pages
	using your computer, check to see if your
	Internet service provider is having connection
	issues in your area.
	L Check your device connections with the
	installation instructions (page 17). The order
	in which you turn on the devices is important.
	L Many installation issues can be resolved by
	resetting all the equipment. First, shut down
	your modem, router, base unit, and computer.
	Then turn the devices back on one at a time in
	this order: modem, router, base unit,
	computer.
	L For more troubleshooting help, visit
	www.joip.com or contact the Aservice
	provider.
	L You have not received the Anumber.
	Install the base unit to your local network
	(page 17, 28).
For product assistance, visit www.globarange.com		79
For Aassistance, visit www.joip.com