Preparation
Setting the unit before use
Important:
L To program features by scrolling through the display menus, see page 47.
L Mainly the direct command method is used in these operating instructions.
Display language N
You can select either “English” or “Français” as the display language. The default setting is “English”.
1{OFF} i{MENU} i
{#}{1}{1}{0}
2{V}/{^}: Select the desired setting.
3Press down the centre of the joystick to save. i{OFF}
Voice guidance language N
Available model:
You can select either “English” or “Français” as the voice guidance language of the answering system (page 62). The default setting is “English”.
1{MENU} i{#}{1}{1}{2}
2{V}/{^}: Select the desired setting.
3{SAVE} i{OFF}
Dialing mode kN
If you cannot make landline calls, change this setting according to your landline service. The default setting is “Tone”.
“Tone”: For tone dial service.
“Pulse”: For rotary/pulse dial service.
1{MENU} i{#}{1}{2}{0}
2{V}/{^}: Select the desired setting.
3{SAVE} i{OFF}
Date and time N
Set the correct date and time so that:
–You can use the alarm function (page 55).
–The unit will announce the day and time a message was recorded when you play back on the answering system (page 59).
1{MENU} i{#}{1}{0}{1}
2Enter the current month, date, and year by selecting 2 digits for each. Example: August 15, 2007
{0}{8} {1}{5} {0}{7}
3Enter the current hour and minute
Example: 9:30
{0}{9} {3}{0}
4{AM/PM}: Select “AM” or “PM”.
5{SAVE} i{OFF}
Note:
L When English is selected as the display language, the
L If you make a mistake when entering the date and time, push the joystick right, left, up, or down to move the cursor, then make the correction.
For product assistance, visit www.globarange.com | 27 |
For Aassistance, visit www.joip.com |
|