Uniden BC125AT owner manual

Page 11

Custom Search - lets you program up to 10 Custom Search Ranges and search any or all of these ranges.

Quick Search - allows you to enter a frequency and start searching up or down from that frequency.

Turbo Search - increases the search speed from 100 to 300 steps per second automatically for bands with 5 kHz steps.

Search Lockouts - you can lock up to 200 search frequencies: 100 temporary frequencies and 100 permanent frequencies in Custom Search, Service Search, Close Call Search, or Quick Search Modes.

Weather Alert Priority - the scanner scans active WX channels every 5 seconds to check for the presence of a 1050 Hz Weather Alert Tone.

Weather Alert Standby - the scanner allows you to monitor for weather alerts broadcast on NOAA channels.

Display Backlight - You can turn on/off the LCD backlight, set it operate on squelch only, keypress only, or both.

Signal Strength Meter - shows the signal strength for more powerful transmissions.

Flexible Antenna with BNC Connector - provides adequate reception in strong signal areas and is designed to help prevent antenna breakage. You can also connect an external antenna for better reception.

Memory Backup - keeps the frequencies stored in memory for an extended time if the scanner loses power.

11

Image 11
Contents BC125AT Owners Earphone Warning PrecautionsContents Programming Channels Weather Operation FCC Wants You To Know Scanning Legally Introduction Direct Access lets you directly access any channel Feature HighlightsPage Page Frequency Range USA Band Plan Step Mode Band Lower UpperIncluded with Your Scanner Scanning Basics Optional AccessoriesWhat is Scanning? Understanding Scanning What is Searching?What is CTCSS/DCS? Conventional Scanning Repeater Operation Simplex OperationChannel Storage Banks Where To Learn MoreService Search Banks Understanding BanksConnecting the Antenna Setting UP Your ScannerConnecting an Optional Antenna Connecting an Earphone/HeadphoneConnecting an Extension Speaker Powering the Scanner Adjusting the Belt ClipInstalling Rechargeable Ni-MH Batteries Installing Non-Rechargeable BatteriesCharging the Ni-MH Batteries USB Message Batt Meaning Scanner Type Cond Getting to Know the Scanner About Your ScannerClr PriWeather menu Srch FuncHold ScanProgramming Turning On the ScannerPlay/Charge Pgm/EItem Meaning Look At The DisplayOnly mode Scan/Service Search/Custom Search/Close CallAdjusting the Volume Setting Up Your ScannerUsing the Scroll Control Knob Setting the Backlight Adjusting the SquelchAdjusting the Contrast Display/Charge menu Setting the Charging TimerAll Memory Clear displays Using the Keypad LockSetting the Beep Tone Resetting the ScannerProgramming Channels Programming Channel Text Tags Setting CTCSS/DCS for a Channel Channel menu Setting Channel ModulationSetting the Priority Channel Deleting Channels Setting Channel DelayClearing a Bank Scanning Stored ChannelsPage Priority Scan Modes Locking Out Channels Manually Selecting a ChannelUnlocking Channels Unlock all Channels in Banks Currently Enabled for ScanTo Lock Out a Specific Channel Service Search Receive/Hold Modes Service Search ModeCustom Search Mode Frequency MHz Step kHz Custom Search Receive/Hold Modes Quick Search ModeQuick Search Receive/Hold Modes Search Options Search DelayProgramming Custom Search Ranges CTCSS/DCS SearchTurn Scroll Control to CTCSS/DCS Search and press Pgm/E Locking Out Search Frequencies Storing Found Search FrequenciesUnlocking Search Frequencies Close Call Using the Close Call FeatureClose Call Menu Close Call Only ModeSelecting Close Call Modes Page Set Close Call Bands Close Call Hits Bank Close Call AlertClose Call Delay Close Call CTCSS/DCS Search Weather OperationSearching for a Weather Broadcast Weather Alert Standby To exit Weather Alert Standby mode, press Scan Technical SpecificationsWeather Alert Priority Operating Temperature NFM 138.150 MHz 157.100 MHz Signal Noise Ratio nominal VHF Low Band 25.0050 MHz Rbrc Information Ctcss Frequencies ReferencesBirdies DSC CodesOne Year Limited Warranty WarrantyPage Procedure for Obtaining Performance of Warranty