Uniden BC125AT owner manual Turning On the Scanner, Play/Charge, Pgm/E, Programming, Beep

Page 29

Key/		Press to	Press Func and
Icon			this key to

		• Turn scanner on and off (press	Enter the Dis-
		• Turn scanner on and off (press	Enter the Dis-
/		and hold).	play/Charge
		• Turn backlight on and off.	menu.

Pgm/E		• Select input data or a menu	• Enter Channel
		item.	Programming
		• Access a channel through its	menu.
		channel number.	• Quickly save
			frequencies in
			various modes.
4/<		• Enter 4.	NA
		• Scroll left in Edit Tag mode.
7/Beep		Enter 7.	Toggle the Key-
			beep setting.

Note: Turn Scroll Control to scroll up and down through menu selections.

Turning On the Scanner

Note: Make sure the scanner's antenna is connected before you turn it on.

1.You can select the band plan (USA or Canada) when you turn on the scanner. When you press and hold for 1 second to turn on the scanner, also press and hold 1 for USA or 2 for Canada. The opening screen displays, followed by the copyright notice.

29

Image 29

Contents

BC125AT Owners Earphone Warning PrecautionsContents Programming Channels Weather Operation FCC Wants You To Know Scanning Legally Introduction Direct Access lets you directly access any channel Feature HighlightsPage Page Frequency Range USA Band Plan Step Mode Band Lower UpperIncluded with Your Scanner Scanning Basics Optional AccessoriesWhat is Scanning? Understanding Scanning What is Searching?What is CTCSS/DCS? Conventional Scanning Repeater Operation Simplex OperationService Search Banks Where To Learn MoreUnderstanding Banks Channel Storage BanksConnecting the Antenna Setting UP Your ScannerConnecting an Optional Antenna Connecting an Earphone/HeadphoneConnecting an Extension Speaker Powering the Scanner Adjusting the Belt ClipInstalling Rechargeable Ni-MH Batteries Installing Non-Rechargeable BatteriesCharging the Ni-MH Batteries USB Message Batt Meaning Scanner Type Cond Getting to Know the Scanner About Your ScannerClr PriWeather menu Hold FuncScan SrchPlay/Charge Turning On the ScannerPgm/E ProgrammingItem Meaning Look At The DisplayOnly mode Scan/Service Search/Custom Search/Close CallAdjusting the Volume Setting Up Your ScannerUsing the Scroll Control Knob Setting the Backlight Adjusting the SquelchAdjusting the Contrast Display/Charge menu Setting the Charging TimerSetting the Beep Tone Using the Keypad LockResetting the Scanner All Memory Clear displaysProgramming Channels Programming Channel Text Tags Setting CTCSS/DCS for a Channel Channel menu Setting Channel ModulationSetting the Priority Channel Deleting Channels Setting Channel DelayClearing a Bank Scanning Stored ChannelsPage Priority Scan Modes Locking Out Channels Manually Selecting a ChannelUnlocking Channels Unlock all Channels in Banks Currently Enabled for ScanTo Lock Out a Specific Channel Service Search Receive/Hold Modes Service Search ModeCustom Search Mode Frequency MHz Step kHz Custom Search Receive/Hold Modes Quick Search ModeQuick Search Receive/Hold Modes Search Options Search DelayProgramming Custom Search Ranges CTCSS/DCS SearchTurn Scroll Control to CTCSS/DCS Search and press Pgm/E Locking Out Search Frequencies Storing Found Search FrequenciesUnlocking Search Frequencies Close Call Using the Close Call FeatureClose Call Menu Close Call Only ModeSelecting Close Call Modes Page Set Close Call Bands Close Call Hits Bank Close Call AlertClose Call Delay Close Call CTCSS/DCS Search Weather OperationSearching for a Weather Broadcast Weather Alert Standby To exit Weather Alert Standby mode, press Scan Technical SpecificationsWeather Alert Priority Operating Temperature NFM 138.150 MHz 157.100 MHz Signal Noise Ratio nominal VHF Low Band 25.0050 MHz Rbrc Information Ctcss Frequencies ReferencesBirdies DSC CodesOne Year Limited Warranty WarrantyPage Procedure for Obtaining Performance of Warranty