Uniden BC125AT owner manual Priority Scan Modes

Page 45

Pappears in the display if it is a priority channel. The modulation, Priority mode icon (if Priority is enabled), and the Close Call icon (if CC Pri or CC-DND is enabled) also displays.

Any CTCSS/DCS received blinks in CTCSS/DCS search and appears solid if programmed.

Numbers at the bottom of the display show the selected scan banks. The currently scanned bank number flashes in Receive mode.

•To temporarily lock out a channel, press L/O.

•To permanently lock out a channel, press L/O twice quickly. See Locking Out Channels on page 46.

Priority Scan Modes

This scanner allows four different Priority modes. These modes also function in Search and Hold modes (except Close Call Only mode and Weather modes). (Default = Off)

In Scan or Search mode, press Func then Pri/1 to view the Priority menu.

Scroll to highlight one of the following option and then press Pgm/E to select it:

•Priority Off - does not check for priority channels.

•Priority DND - checks Priority channels every 2 seconds only when not receiving. If you set Priority mode to Priority DND, the scanner turns on the PRI icon during scanning or searching.

45

Image 45

Contents BC125AT Owners Earphone Warning PrecautionsContents Programming Channels Weather Operation FCC Wants You To Know Scanning Legally Introduction Direct Access lets you directly access any channel Feature HighlightsPage Page Frequency Range USA Band Plan Step Mode Band Lower UpperIncluded with Your Scanner Optional Accessories What is Scanning?Scanning Basics What is Searching? What is CTCSS/DCS?Understanding Scanning Conventional Scanning Repeater Operation Simplex OperationService Search Banks Where To Learn MoreUnderstanding Banks Channel Storage BanksConnecting the Antenna Setting UP Your ScannerConnecting an Earphone/Headphone Connecting an Extension SpeakerConnecting an Optional Antenna Powering the Scanner Adjusting the Belt ClipInstalling Rechargeable Ni-MH Batteries Installing Non-Rechargeable BatteriesCharging the Ni-MH Batteries USB Message Batt Meaning Scanner Type Cond Getting to Know the Scanner About Your ScannerPri Weather menuClr Hold FuncScan SrchPlay/Charge Turning On the ScannerPgm/E ProgrammingItem Meaning Look At The DisplayOnly mode Scan/Service Search/Custom Search/Close CallSetting Up Your Scanner Using the Scroll Control KnobAdjusting the Volume Setting the Backlight Adjusting the SquelchAdjusting the Contrast Display/Charge menu Setting the Charging TimerSetting the Beep Tone Using the Keypad LockResetting the Scanner All Memory Clear displaysProgramming Channels Programming Channel Text Tags Setting CTCSS/DCS for a Channel Channel menu Setting Channel ModulationSetting the Priority Channel Deleting Channels Setting Channel DelayClearing a Bank Scanning Stored ChannelsPage Priority Scan Modes Locking Out Channels Manually Selecting a ChannelUnlock all Channels in Banks Currently Enabled for Scan To Lock Out a Specific ChannelUnlocking Channels Service Search Receive/Hold Modes Service Search ModeCustom Search Mode Frequency MHz Step kHz Custom Search Receive/Hold Modes Quick Search ModeQuick Search Receive/Hold Modes Search Options Search DelayCTCSS/DCS Search Turn Scroll Control to CTCSS/DCS Search and press Pgm/EProgramming Custom Search Ranges Locking Out Search Frequencies Storing Found Search FrequenciesUnlocking Search Frequencies Close Call Using the Close Call FeatureClose Call Only Mode Selecting Close Call ModesClose Call Menu Page Set Close Call Bands Close Call Hits Bank Close Call AlertClose Call Delay Weather Operation Searching for a Weather BroadcastClose Call CTCSS/DCS Search Weather Alert Standby Technical Specifications Weather Alert PriorityTo exit Weather Alert Standby mode, press Scan Operating Temperature NFM 138.150 MHz 157.100 MHz Signal Noise Ratio nominal VHF Low Band 25.0050 MHz Rbrc Information Ctcss Frequencies ReferencesBirdies DSC CodesOne Year Limited Warranty WarrantyPage Procedure for Obtaining Performance of Warranty