At Quick Search, press Hold to start searching.
To start a Quick Search at the current frequency during Close Call Search, turn Scroll Control in Hold mode and press Hold to start searching.
When the scanner finds a transmission, it stops on it. When the transmission ends, the scanner resumes searching according to the delay setting.
While searching in Quick Search mode, the upper line displays Quick Search and the lower line displays the searching frequency and the direction indicator (↑or ↓) with the modulation.
If you want to change the search direction or if it is a long transmission and you want to continue searching, turn Scroll Control or press Srch/Svc.
Quick Search Receive/Hold Modes
To hold on a frequency press Hold. To step through the frequencies, turn Scroll Control in Hold mode. Press Hold to resume.
While monitoring a transmission, the upper line displays Quick Search and the lower line displays the current frequency and the direction indicator (↑or ↓).
The modulation, Priority mode icon (if Priority is enabled), any CTCSS/DCS received (if enabled), and the Close Call icon (if CC Pri or
•To store a frequency, press Pgm/E. See Storing Found Search Frequencies, page 55.
•To temporarily lock out a frequency, press L/O.
52